1.10. The combined switch distant and a passing light
Change of a passing light on distant and back
Near and far light
Indexes of the right and left turns
For illumination inclusion turn the button in the end of the lever.
The first position: lay illumination, a tail light, illumination of licence plate and illumination of a guard of devices join only.
The second position: headlights join also.
For headlight inclusion press the lever forward. For passing light inclusion establish the lever in the opposite direction. For inclusion of a light signalling device the lever establish further away in a direction back.
The control lamp in a guard of devices specifies that the headlight is included. The light signal can be included, even if the headlight switch is not included.
For inclusion of the blinking index shift switching lever upwards or downwards.
After journey on a curvilinear site the blinking light index automatically is switched in the neutral position. However at change of a strip of road you should return manually the alarm system switch in an initial position. About strip change are expensive it is possible to give a signal as follows: the switch of the blinking index shift in a desirable direction only a little and then hold with his hand.
If in a guard of devices the green bulb starts blinking faster, than usually it testifies that the lamp накаливания the forward or back blinking alarm system has fused. If the control lamp does not flash at all, obviously, the safety lock or a control lamp has fused.