Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
	1. The maintenance instruction
		1.1. The control panel
		1.2. Alarm lamps
		1.3. An arrangement of identification tablets
		1.4. Radio receiver AM-UKV with electronic adjustment
		1.5. The AM-UKV-RADIO TAPE RECORDER with electronic adjustment
		1.6. The catalyst
		1.7. Keys
		1.8. An ignition switch and the ignition lock
		1.9. The handle of management of a screen wiper and a windscreen washer
		1.10. The combined switch distant and a passing light
		1.11. Heating of back glass and lateral mirrors
		1.12. Possible malfunctions
			1.12.1. Start of the engine from the auxiliary battery
			1.12.2. Wheel replacement
			1.12.3. Detection of a place of a leak
			1.12.4. Weekly checks
			1.12.5. Check and restoration of level of a liquid of a hydrodrive of brakes
			1.12.6. Replacement of lamps and safety locks
			1.12.7. Recommended lubricants and liquids
	2. Maintenance service
	3. Engines
	4. Cooling system
	5. Heating and ventilation system
	6. Fuel and an exhaust system
	7. System of start-up of the engine
	8. Coupling
	9. Transmissions
	10. Semiaxes
	11. Brakes
	12. Suspension brackets and a steering
	13. A body
	14. An electric equipment

1-12-6-zamena-lamp-i-predokhranitelejj.html

1.12.6. Replacement of lamps and safety locks

PERFORMANCE ORDER

	1. If one of headlights, a dimensional lantern or a braking signal most a plausible reason is пергорание lamps do not burn. The replacement procedure of lamps see in subsection 14.5. If both signals of braking the reason is malfunction of the switch do not burn.
	2. If control lamps, a headlight do not burn some, dimensional or back lanterns has fused a safety lock or conducting (subsection 14.3 see) is faulty. Safety locks are in колодке on the forward panel from outside the driver.
	3. Additional safety locks and breakers are in the assembly blocks mounted in a motor compartment on the right and at the left.
	4. For safety lock replacement open a cover, having overcome effort of latches. Pull for the built in plastic holder and get a safety lock. Insert the new safety lock calculated on the same current, as replaced. Find out the reason перегорания and eliminate.