Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
10.1. Specifications
10.2. Semiaxis removal
10.3. Semiaxis installation
10.4. Repair of a semiaxis and replacement of protective covers
10.5. Check of SHRUS
10.6. The bearing of an intermediate support of the right semiaxis
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



10-2-snyatie-poluosi.html

10.2. Semiaxis removal

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Merge a liquid or oil from картера transmissions.
3. Get шплинт and корончатую a washer.
4. Fix a nave (the adaptation or ask the assistant to press a brake) and turn away a semiaxis nut.
5. Remove a brake support, take aside and fix, without disconnecting a hose.
6. Расшплинтуйте also turn away a nut of steering draught.
7. Выпрессуйте a tip from a pin eye.
8. Turn away a nut of the bottom spherical support and выпрессуйте a support from a pin.
9. Screw a nut on полуось and easy blows beat out полуось from a nave, immediately fix the semiaxis termination.
Right полуось on cars of early release
10. Hook mount and get полуось from картера transmissions.
11. Press so that the lock ring was pressed into a flute and left a leading gear wheel of differential.
12. Remove полуось.
Right полуось with an intermediate support on cars of late release
13. Turn away bolts of the case of the bearing of an intermediate support.
14. Turning both hands displace the case of the bearing and hook, having inserted the lever between the case and an arm.
15. Remove полуось in gathering with the bearing and the SHRUS case.
Left полуось on all cars, except equipped with automatic transmission
16. Procedure same, as at removal of the right semiaxis. At removal of a semiaxis do not damage an epiploon.
Left полуось on cars with automatic transmission
17. For removal of the left semiaxis at first it is necessary to remove right полуось.
18. Cautiously pass пруток or the big screw-driver, through a window of the right semiaxis, against the stop in an end face of the left semiaxis, without having damaged thus a leading gear wheel, satellites or an axis of satellites (1 – a screw-driver sting, 2 – a leading gear wheel, 3 – полуось, 4 – the platen of satellites).
19. Easy blows beat out полуось. Thus the lock ring should be pressed into a flute and leave a leading gear wheel of differential.
20. Remove полуось.


10.1. Specifications

10.3. Semiaxis installation