Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
10.1. Specifications
10.2. Semiaxis removal
10.3. Semiaxis installation
10.4. Repair of a semiaxis and replacement of protective covers
10.5. Check of SHRUS
10.6. The bearing of an intermediate support of the right semiaxis
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment



10.3. Semiaxis installation

The prevention

At assemblage to obligatory replacement are subject: a semiaxis nut, a lock ring of the internal SHRUS, all removed шплинты, nuts of the bottom spherical support.


1. Check up a condition of an epiploon of a semiaxis, it is recommended to replace an epiploon.
2. Carefully clear шлицы semiaxes, grease шлицы and an epiploon edge.
3. Check up reliability of fastening of collars of covers.
4. Replace an internal lock ring (which was exposed to deformation at removal).
5. At semiaxis installation be careful, do not damage an epiploon.
6. At greasing of an epiploon and шлицов полуось it is possible to establish, without using adaptations.
Right полуось on cars of early release (the intermediate support is absent)
7. Cautiously, without having damaged an epiploon, enter полуось into differential.
8. Enter шлицы into gearing with шлицами a leading gear wheel, press on полуось so that the lock ring has come into a flute of a leading gear wheel.
9. Be convinced that the ring has come into a flute, with force having shaken полуось.
Right полуось on cars with an intermediate support
10. Cautiously, without having damaged an epiploon enter полуось into differential, having passed through a window in an arm.
11. Combine apertures under bolts and insert the bearing case.
12. Tighten bolts with the set moment.
Left полуось on all cars, except equipped with automatic transmission
13. Procedure same, as at installation of the right semiaxis.
Left полуось on cars with automatic transmission
14. Procedure same, as at installation of the right semiaxis. At first it is established left, then right полуось.
All cars
15. Grease external шлицы semiaxes and insert into a nave.
16. Dress a washer and wrap a new nut.
17. Insert a spherical support into a pin and tighten a nut with the set moment.
18. Attach a tip of steering draught, tighten a nut.
19. Tighten a nut of steering draught so that it was possible to insert шплинт, without exceeding the set moment of an inhaling.
20. Зашплинтуйте a nut.
21. Establish a brake support.
22. Tighten a new nut of a semiaxis with the set moment, keeping a nave from проворачивания.
23. Establish new корончатую a lock washer, having combined a groove under шплинт with an aperture in a semiaxis, and зашплинтуйте.
24. Establish wheels, lower the car.
25. Fill in in картер oil / трансмиссионную a liquid.

10.2. Semiaxis removal

10.4. Repair of a semiaxis and replacement of protective covers