Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
10.1. Specifications
10.2. Semiaxis removal
10.3. Semiaxis installation
10.4. Repair of a semiaxis and replacement of protective covers
10.5. Check of SHRUS
10.6. The bearing of an intermediate support of the right semiaxis
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



10-4-remont-poluosi-i-zamena-zashhitnykh-chekhlov.html

10.4. Repair of a semiaxis and replacement of protective covers

EXTERNAL SHRUS

PERFORMANCE ORDER
1. Remove полуось.
2. Measure length (L) a cover in the collected condition.
3. Remove collars and displace a cover in an average part of a semiaxis.
4. If the SHRUS does not vary, put labels of its mutual orientation concerning a semiaxis.
5. Clamp полуось in a vice.
6. Screw a nut on полуось and by means of a stripper remove the SHRUS, without having damaged thus a carving. The SHRUS can be removed hammer blows, having driven a lock ring in a flute.
7. Remove a cover and get a lock ring.
8. Wash out the SHRUS in kerosene and carefully dry.
9. At detection of the slightest signs of deterioration replace the SHRUS in gathering.
10. At assemblage wrap up шлицы semiaxes a tape.
11. Dress on полуось a collar and a cover.
12. Remove a tape and insert in полуось a new lock ring.
13. Put on the SHRUS, having combined the put labels (if the SHRUS did not vary).
14. Screw a nut, clamp полуось in a vice and easy blows of a hammer besiege the SHRUS so that the lock ring has come into a flute.
15. Put in a cover special greasing, overwind a cover that greasing has come into folds.
16. Distribute in a cover all superfluous greasing.
17. Dress a cover on the SHRUS, dress a new collar.
18. Bend the termination of a collar and fix ears.
19. Establish a cover so that the length measured at dismantling has been sustained.
20. Be convinced that the cover edge has come into a semiaxis flute.
21. Fix a cover a small collar.
22. Establish полуось.

Internal SHRUS

BALL SHRUS

PERFORMANCE ORDER
1. Execute actions in subitem 1-18. Have to a kind that the SHRUS acts in film only hammer blows on оправке, the shock stripper is not applied.
2. Check up length (L) a cover.

THREE-ROLLER SHRUS

PERFORMANCE ORDER
1. Remove полуось.
2. Measure length of a cover in the collected condition.
3. Remove collars and displace a cover in an average part of a semiaxis.
4. If the SHRUS does not vary, put labels of mutual orientation of the case of the SHRUS concerning a semiaxis.
5. Remove the SHRUS case so, rollers should remain on a hinge tripod.
6. Put labels on a tripod and on semiaxes.
7. Get a lock ring.
8. Remove a hinge tripod.
9. Wash out the SHRUS in kerosene and carefully dry.
10. Attentively examine the hinge.
11. At detection of the slightest signs of deterioration replace the SHRUS.
12. The new SHRUS steals up on marks on a lateral surface of the replaced hinge.
13. Wrap up a tape шлицы semiaxes.
14. Put on on полуось a collar and a cover.
15. Remove a tape and dress a hinge tripod, having combined the put labels (if the SHRUS did not vary).
15. Fix the hinge a new lock ring.
16. Put in the hinge case special greasing (it is delivered complete with the new hinge), distribute greasing round rollers.
17. Put on a tripod the hinge case, having combined the put labels of the case and a semiaxis (if the SHRUS did not vary).
18. Dress a cover on the SHRUS case, dress a new collar.
19. Tighten a collar, bend the termination of a collar and fix ears.
20. Establish a cover so that the length measured at dismantling has been sustained.
21. Be convinced that the cover edge has come into a semiaxis flute.
22. Fix a cover a small collar.
23. Establish полуось.


10.3. Semiaxis installation

10.5. Check of SHRUS