Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
11.1. Specifications
11.2. A hydrodrive of brakes
11.3. Tubes and hoses
11.4. Колодки
11.5. A brake disk
11.6. Drums
11.7. A support of a forward brake
11.8. A support of a back brake
11.9. The wheel cylinder
11.10. The main cylinder
11.11. A brake pedal
11.12. The vacuum amplifier of brakes
11.13. The amplifier of brakes and the return valve
11.14. The lever of a manual brake
11.15. Cables of a manual brake
11.16. Adjustment of a manual brake
11.17. The switch of a signal of braking
11.18. The switch of a lamp of a manual brake
11.19. Antiblocking system
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



11-1-tekhnicheskie-dannye.html

11.1. Specifications


Type of brakes: two-planimetric with the vacuum amplifier, on a part of cars the antiblocking system (ABS) with back disk brakes is established. On cars without ABS-system back brakes drum-type. A manual brake with тросовым a drive

Forward brakes
Type
Disk (continuous disks on cars of 1,4 l and ventilated on cars 1,6)
Designation:
  – On cars of 1,4 l
CL18C
  – On cars of 1,6 l
CL18VD
Diameter of a disk (all cars)
240 mm
Thickness of a new disk:
  – CL18C
12,0 mm
  – CL18VD
18,0 mm
The limiting:
  – CL18C
10,0 mm
  – CL18VD
16,0 mm
Disk palpation
No more than 0,07 mm
Thickness of overlays
Not less than 2,0 mm
Back disk brakes
Designation
AD7HA
Diameter of a disk (all cars)
234 mm
Thickness of a new disk
7,0 mm
The limiting
6,0 mm
Disk palpation
No more than 0,07 mm
Thickness of overlays
Not less than 2,0 mm
Back drum-type brakes
Designation
LT18C
Internal diameter of a drum:
  – The new
180 mm
  – The limiting
181 mm
Ovality
0,03 mm
Thickness of overlays
Not less than 1,5 mm
Pedal
Distance from a body floor:
  – For cars with the right wheel:
     • from a manual transmission
155 – 165 mm
     • with automatic transmission
164 – 174 mm
  – For cars with the left wheel:
     • from a manual transmission
148 – 158 mm
     • with automatic transmission
157 – 167 mm
Pedal free wheeling
1 – 3 mm
The vacuum amplifier
Diameter of a diaphragm:
  – On cars of 1,4 l
205 mm
  – On cars of 1,6 l:
     • the primary
180 mm
     • the secondary
155мм
Выступание a pusher (at depression 500 тор):
  – Amplifiers C180 and S180
4,875 – 5,125 mm
  – Amplifiers M165T, М195Т, S205 and C205
10,275 – 10,525 mm
Regulator of pressure of back brakes
In cars of 1,4 l and 1,6 l without ABS-system:
  – With the right wheel
The dosing out valve on 2 contours, is mounted separately from the main cylinder
  – With the left wheel
The dosing out valve on 2 contours, is built in the main cylinder
In cars of 1,6 l with ABS-system
The valve of double loading with variable factor of pressure decrease and a bifurcation point
Diameter of the main cylinder
20,64 mm
Manual brake
Quantity of clicks of full braking:
  – For drum-type brakes
5 – 6
  – For disk brakes
7 – 8
Quantity of clicks of inclusion of a control lamp
No more than 1

The inhaling moments (Н.м.)

The union for prorolling
10
Nuts of unions of tubes
16
Bolt of the ring union (банджо)
18
Fingers of a support of forward brakes
25
Bolts of fastening of a forward support to an arm
60
Fingers of a support of back brakes
35
Bolts of fastening of a back support to an arm
45
Nut of the clown of a manual brake
40
Bolts of the wheel cylinder of back brakes
8
Bolts of a board of a brake of back drum-type brakes
45
Nuts of fastening of the main cylinder
10
Bolts and nuts of an arm of a pedal and the vacuum amplifier
15
Bolts of the lever of a manual brake
10


11. Brakes

11.2. A hydrodrive of brakes