Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
11.1. Specifications
11.2. A hydrodrive of brakes
11.3. Tubes and hoses
11.4. Колодки
11.5. A brake disk
11.6. Drums
11.7. A support of a forward brake
11.8. A support of a back brake
11.9. The wheel cylinder
11.10. The main cylinder
11.11. A brake pedal
11.12. The vacuum amplifier of brakes
11.13. The amplifier of brakes and the return valve
11.14. The lever of a manual brake
11.15. Cables of a manual brake
11.16. Adjustment of a manual brake
11.17. The switch of a signal of braking
11.18. The switch of a lamp of a manual brake
11.19. Antiblocking system
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



11-15-trosy-ruchnogo-tormoza.html

11.15. Cables of a manual brake

CABLES OF BACK BRAKES

2 cables – left and right are provided.

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and establish on supports.
2. Release a manual brake.
3. On back drum-type brakes remove колодки and disconnect a cable from the lever, remove a spring and a cable arm (arrows specify nuts of an arm of a brake).
4. On back disk brakes get скобу.
5. Disconnect a tip of a cable (marksman) from the support lever on back brakes.
6. Turn away a nut and bolts of fastening of arms of a cover of a cable to the bottom.
7. Disconnect a cable from a levelling roller in a forward part of the car and remove a cable.
8. For access to a roller it is required to remove a thermal guard.

Installation

PERFORMANCE ORDER
1. The cable is established upside-down.
2. The ledge on a cable arm should come into dredging in a support
(Disk brakes).
3. Adjust a cable.

CABLES OF FORWARD BRAKES

Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Block back wheels and release a manual brake.
3. Remove the central section of the forward panel.
4. Disconnect a socket from the switch of a control lamp of a manual brake.
5. Count up quantity of threads of a carving to a nut, turn away a nut and disconnect an adjusting bolt from the brake lever.
6. Lift a forward part of the car.
7. Disconnect back cables from a levelling roller in a forward part of the car and remove a cable.
8. Remove forward cables with the equalizer and an adjusting bolt, having passed through an aperture in a floor.

Installation

PERFORMANCE ORDER
1. The cable is established upside-down.
2. Turn away a nut on in advance counted up number of threads of a carving, check up work of a brake and if necessary adjust.
3. Before panel installation check up serviceability of the switch and a control lamp.


11.14. The lever of a manual brake

11.16. Adjustment of a manual brake