Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
12.1. Specifications
12.2. Bearings of naves of forward wheels
12.3. A rack of a forward suspension bracket
12.4. The bottom lever
12.5. A spherical support of the bottom lever
12.6. The stabilizer of cross-section stability of a forward suspension bracket
12.7. Bearings of back wheels
12.8. Details of a back suspension bracket
12.9. A wheel
12.10. The switch of ignition and the lock of blocking of a steering column
12.11. A steering column
12.12. The steering mechanism
12.13. Covers of steering transfer
12.14. A hydrodrive
12.15. The hydraulic booster pump
12.16. Tips of steering draught
13. A body
14. An electric equipment
 




6ac69956



12-11-rulevaya-kolonka.html

12.11. A steering column


The prevention

The present description does not concern the cars equipped with a pillow of safety.


Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Remove a wheel.
3. Remove switches with levers (cм. Subsection 14.4).
4. Disconnect from the switch of ignition a socket.
5. Remove the bottom panel from outside the driver.
6. Get and pull together a column sealant in a partition of a motor compartment.
7. Remove from a partition of a motor compartment a metal cover, having turned away three nuts (on a part of cars).
8. Dress a wheel and turn a shaft for access to a bolt карданного the hinge.
9. Turn away a hinge bolt.
10. Turn on two top bolts and two bottom nuts and remove a column.

Check

PERFORMANCE ORDER
1. Check up presence of deformation of a shaft, integrity safety двухконусного connections, if necessary a column replace.
2. Check up a condition of bearings and plugs, люфты a shaft and hinges.
3. At the slightest signs of deterioration and damages a column replace.
4. Measure length of a column from an end face to a hinge pin.
5. If the length does not correspond to norm a column replace.

Installation

PERFORMANCE ORDER
1. Put on a column a cover and a sealant, fix a sealant a collar (if it is provided).
2. Establish a column and enter in карданный the hinge so that the collar bolt at заворачивании rested against dredging on a shaft on шлицевом the shaft termination.
3. Tighten two top bolts and two bottom nuts with the set moment.
4. Tighten a bolt карданного the hinge.
5. Put on a cover and tighten three nuts (on a part of cars).
6. Put on a cover a cover and fix a collar.
7. Establish the bottom panel.
8. Attach a socket to the ignition switch.
9. Establish lever switches.
10. Establish a wheel.
11. Connect the battery to weight.


12.10. The switch of ignition and the lock of blocking of a steering column

12.12. The steering mechanism