Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
12.1. Specifications
12.2. Bearings of naves of forward wheels
12.3. A rack of a forward suspension bracket
12.4. The bottom lever
12.5. A spherical support of the bottom lever
12.6. The stabilizer of cross-section stability of a forward suspension bracket
12.7. Bearings of back wheels
12.8. Details of a back suspension bracket
12.9. A wheel
12.10. The switch of ignition and the lock of blocking of a steering column
12.11. A steering column
12.12. The steering mechanism
12.13. Covers of steering transfer
12.14. A hydrodrive
12.15. The hydraulic booster pump
12.16. Tips of steering draught
13. A body
14. An electric equipment
 




6ac69956



12-12-rulevojj-mekhanizm.html

12.12. The steering mechanism


The prevention

The present description does not concern the cars equipped with a pillow of safety.


THE STEERING MECHANISM WITHOUT THE HYDRAULIC BOOSTER

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and establish on supports.
2. Remove both wheels.
3. Expose wheels in driving position on a straight line.
4. Расшплинтуйте also release a nut of steering draught, выпрессуйте the tip hinge, turn away a nut.
5. Disconnect other tip of steering draught.
6. In a motor compartment turn away a nut (are specified by arrows) and pull together a cover карданного the hinge.
7. Designate mutual position of the hinge and a shaft of the steering mechanism, release a bolt (it is specified by an arrow) and disconnect the hinge.
8. Turn away bolts and remove arms of the steering mechanism.
9. Get the steering mechanism through a niche of the right wheel (on а/м with the right wheel) or raise the steering mechanism and get from a motor compartment (on а/м with the left wheel).

Check

PERFORMANCE ORDER
1. Check up presence of signs of deterioration or damages.
2. Check up moving freedom рейки, be convinced absence люфтов and jammings.
3. Believe presence of deformation and damages рейки.
4. Check up a condition of covers.
5. Check up люфт in tips of draughts.

Installation

PERFORMANCE ORDER
1. Centre the steering mechanism.
2. For this purpose define number of turns of a shaft between extreme positions рейки.
3. From extreme position рейки turn away a shaft on half of this number of turns.
4. Establish the mechanism and arms, tighten bolts.
5. Attach карданный the hinge, having combined labels (if the removed mechanism is established).
6. Put on a cover, a framework and wrap nuts.
7. Attach the hinge of draught and screw a nut.
8. Tighten a nut and зашплинтуйте.
9. Attach the second draught.
10. Establish wheels and lower the car.

THE STEERING MECHANISM WITH THE HYDRAULIC BOOSTER

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and establish on supports.
2. Remove both wheels.
3. Turn on the union (are specified by arrows) on the steering mechanism and merge a liquid.
4. Remove a forward exhaust pipe.
5. Turn away a nut, выпрессуйте a tip and disconnect steering draught.
6. Disconnect the second steering draught.
7. In a motor compartment turn away a nut and pull together a cover карданного the hinge.
8. Designate mutual position of the hinge and a shaft of the steering mechanism, release a bolt and disconnect the hinge.
9. Turn away bolts of a collar of an arm on the left side (are specified by arrows).
10. Turn away bolts of a collar of an arm on the right side (are specified by arrows).
11. Remove arms of the steering mechanism.
12. Remove the steering mechanism on the left side of the car.

Check

PERFORMANCE ORDER
1. Clear and check up presence of signs of deterioration or damages.
2. Believe presence of deformation and damages рейки.
3. Check up a condition of covers.
4. Check up люфт in tips of draughts.

Installation

PERFORMANCE ORDER
1. Centre the steering mechanism.
2. For this purpose define number of turns of a shaft between extreme positions рейки.
3. From extreme position рейки turn away a shaft on half of this number of turns.
4. Establish the mechanism and arms on available labels, tighten bolts.

The prevention

At first slightly tighten the bottom bolts of arms, then wrap other bolts and tighten in the specified sequence.


And. 1st stage of an inhaling

Century 2nd stage
5. Establish a forward exhaust pipe.
6. Attach карданный the hinge, having combined labels (if the removed mechanism is established).
7. Tighten a bolt.
8. Put on a cover, a framework and wrap nuts.
9. Attach the hinge of draught and screw a nut.
10. Tighten a nut and зашплинтуйте.
11. Attach the second draught.
12. Attach tubes.
13. Establish wheels, remove air from a hydrodrive (subsection 12.14 see).
14. Lower the car.


12.11. A steering column

12.13. Covers of steering transfer