Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
12.1. Specifications
12.2. Bearings of naves of forward wheels
12.3. A rack of a forward suspension bracket
12.4. The bottom lever
12.5. A spherical support of the bottom lever
12.6. The stabilizer of cross-section stability of a forward suspension bracket
12.7. Bearings of back wheels
12.8. Details of a back suspension bracket
12.9. A wheel
12.10. The switch of ignition and the lock of blocking of a steering column
12.11. A steering column
12.12. The steering mechanism
12.13. Covers of steering transfer
12.14. A hydrodrive
12.15. The hydraulic booster pump
12.16. Tips of steering draught
13. A body
14. An electric equipment



12.16. Tips of steering draught

Removal and installation

1. Lift a forward part of the car and establish on supports.
2. Remove a wheel.
3. Расшплинтуйте also release a nut of steering draught, выпрессуйте the tip hinge, turn away a nut.
4. Release a counternut of steering draught.
5. Turn out a draught tip, having counted up number of turns, or designate an initial arrangement of a tip of draught (the label is specified by an arrow).
6. Clear draught and tip carvings.
7. Replace a tip if the cover is damaged, in a hinge finger there is appreciable люфт, or a finger заедает in the hinge and also if the tip carving is damaged.
8. Wrap a tip on the counted number of turns.
9. Clear конусную a finger part attach a tip to a rotary fist.
10. Tighten a nut with the set moment.
11. Tighten a nut before combination of cuts of a nut with apertures in a finger and зашплинтуйте.
12. Establish a wheel and lower the car.
13. Check up corners of installation of forward wheels and tighten a counternut.

12.15. The hydraulic booster pump

13. A body