Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
12.1. Specifications
12.2. Bearings of naves of forward wheels
12.3. A rack of a forward suspension bracket
12.4. The bottom lever
12.5. A spherical support of the bottom lever
12.6. The stabilizer of cross-section stability of a forward suspension bracket
12.7. Bearings of back wheels
12.8. Details of a back suspension bracket
12.8.1. A rack of a back suspension bracket
12.8.2. Levers of a back suspension bracket
12.8.3. Bars
12.8.4. The nave case
12.8.5. The stabilizer of cross-section stability of a back suspension bracket
12.9. A wheel
12.10. The switch of ignition and the lock of blocking of a steering column
12.11. A steering column
12.12. The steering mechanism
12.13. Covers of steering transfer
12.14. A hydrodrive
12.15. The hydraulic booster pump
12.16. Tips of steering draught
13. A body
14. An electric equipment
 




6ac69956



12-8-3-shtangi.html

12.8.3. Bars

Removal

PERFORMANCE ORDER
1. Lift a back part of the car and establish on supports.
2. Remove a wheel.
3. Turn away a bar nut on the case of a nave and remove a washer.
4. Turn away a nut (it is specified by arrows) bars on an arm of a body and remove a bar.

Check

PERFORMANCE ORDER
1. Check up a bar and plugs.
2. Bars vary only in gathering with plugs.

Installation

PERFORMANCE ORDER
1. Establish a bar on a hairpin in the case of a nave and screw a new nut.
2. Establish a bar on an arm, pass a bolt and screw a new nut.
3. Establish a wheel and lower the car.
4. Roll the car forward and back, shake upwards – downwards.
5. Tighten all nuts with the set moment.


12.8.2. Levers of a back suspension bracket

12.8.4. The nave case