Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
12.1. Specifications
12.2. Bearings of naves of forward wheels
12.3. A rack of a forward suspension bracket
12.4. The bottom lever
12.5. A spherical support of the bottom lever
12.6. The stabilizer of cross-section stability of a forward suspension bracket
12.7. Bearings of back wheels
12.8. Details of a back suspension bracket
12.9. A wheel
12.10. The switch of ignition and the lock of blocking of a steering column
12.11. A steering column
12.12. The steering mechanism
12.13. Covers of steering transfer
12.14. A hydrodrive
12.15. The hydraulic booster pump
12.16. Tips of steering draught
13. A body
14. An electric equipment
 




6ac69956



12-9-rul.html

12.9. A wheel


The prevention

The present description does not concern cars with a safety pillow.


Removal

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Expose wheels in driving position on a straight line.
3. On a wheel with 2 spokes remove the central overlay, remove the panel of a sound signal, having disconnected latches a screw-driver inserted between a wheel and the panel.
4. On a wheel with 3 spokes disconnect a collar a screw-driver inserted into deepening of the bottom spoke.
5. Cautiously hook the central overlay for a bottom edge, disconnect other latches and remove an overlay.
6. On a wheel with 4 spokes release screws in the basis of a nave and remove an overlay.
7. Disconnect wires of a sound signal.
8. Turn away the screw of an arm of a wire (on a part of cars).
9. Designate wheel position on a shaft (the arrow specifies a label of position of a wheel on a shaft).
10. Turn away a nut.
11. Remove a wheel with шлицов a shaft, having turned in the parties and having pulled on itself, or a stripper.

Installation

PERFORMANCE ORDER
1. Grease surfaces of details automatic отключателя the index of turn and a contact ring of a sound signal.
2. The wheel is established upside-down.
3. Be preliminary convinced that automatic отключатель is on the average position, breakage of the switch of turns otherwise is possible.
4. If necessary establish a wheel so that spokes were symmetrized concerning the car.


12.8.5. The stabilizer of cross-section stability of a back suspension bracket

12.10. The switch of ignition and the lock of blocking of a steering column