Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
13.1. Specifications
13.2. Maintenance service
13.3. Small damages of a body
13.4. Large damages of a body
13.5. A forward bumper
13.6. A back bumper
13.7. A cowl
13.8. A cable of a drive of the lock of a cowl
13.9. The cowl lock
13.10. Doors
13.11. The internal panel of a door
13.12. The door lock, the switch of the lock and a handle detail
13.13. Glass of a door and стеклоподъемник
13.14. A cover of a luggage carrier (sedan)
13.15. A cover of a cargo compartment (a compartment and a hatchback)
13.16. The lock of a cover of a luggage carrier (sedan)
13.17. The lock of a cover of a cargo compartment and the handle
13.18. Details of the central lock
13.19. External glasses
13.20. A windscreen, back glass and stationary glasses
13.21. The hatch
13.22. Decorative overlays of a body
13.23. Seats
13.24. Panels of facing of salon
13.25. Average section of the forward panel
13.26. Details of forward facing of salon
14. An electric equipment



13.11. The internal panel of a door

1. Disconnect the battery from weight.
2. On cars with manual стеклоподъемником hook the handle the thin tool and remove from latches. Remove an overlay.
3. Cautiously hook and remove an overlay of the internal handle of the lock.
4. Get заглушки and turn away screws of the decorative handle, hook and remove the handle.
5. For access to the screw remove from an armrest the switch стеклоподъемника (or a guard) and turn away the screw.
6. Turn away other screws on a panel contour (which part is under заглушками).
7. On compartment cars turn away fastening screws on the switch стеклоподъемника.
8. Disconnect spring latches on a panel contour, raise the panel and remove with скобы.
9. Submit the panel on itself and disconnect electric drive sockets стеклоподъемника and the central lock. The bottom sealant of a window aperture is executed at the same time with the panel and should act in film together it.
10. If necessary remove the water protective plastic screen, having hooked in a corner and it is accurate отслоив. Try to keep screen hermetic.

11. The panel is established upside-down. Glue the screen on all contour of a door. The bottom sealant of a window should enter into a door skeleton.

13.10. Doors

13.12. The door lock, the switch of the lock and a handle detail