Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
13.1. Specifications
13.2. Maintenance service
13.3. Small damages of a body
13.4. Large damages of a body
13.5. A forward bumper
13.6. A back bumper
13.7. A cowl
13.8. A cable of a drive of the lock of a cowl
13.9. The cowl lock
13.10. Doors
13.11. The internal panel of a door
13.12. The door lock, the switch of the lock and a handle detail
13.13. Glass of a door and стеклоподъемник
13.14. A cover of a luggage carrier (sedan)
13.15. A cover of a cargo compartment (a compartment and a hatchback)
13.16. The lock of a cover of a luggage carrier (sedan)
13.17. The lock of a cover of a cargo compartment and the handle
13.18. Details of the central lock
13.19. External glasses
13.20. A windscreen, back glass and stationary glasses
13.21. The hatch
13.22. Decorative overlays of a body
13.23. Seats
13.24. Panels of facing of salon
13.25. Average section of the forward panel
13.26. Details of forward facing of salon
14. An electric equipment



13.15. A cover of a cargo compartment (a compartment and a hatchback)

Removal and installation

1. Lift a cover and fix a prop.
2. On cars of a compartment and 5-dvernyj a hatchback release a counternut, turn out a hairpin of the hinge and remove the hinge.
3. On 3 door hatchback turn away two bolts of an arm.
4. Slightly press a rack and, without allowing to be straightened, remove a rack from a cover.
5. Turn away bolts and disconnect a rack from a body.
6. Establish a rack upside-down.
Cover of a cargo compartment
1. Disconnect the battery from weight.
2. Remove the internal panel of a cover.
3. Disconnect and designate all sockets.
4. Extend sockets and conducting from a cover, having adhered for a cord and having got a through sealant. A cord leave in a cover.
5. Disconnect a hose from an atomizer стеклоомывателя, get a hose, having adhered for a cord.
7. Ask the assistant to keep a cover.
8. Designate position of loops concerning a cover.
9. Disconnect from a cover a rack.
10. Turn away bolts and uncover.
11. Establish a cover upside-down.
12. ротяните in a cover conducting and a hose, having attached to a cord.
13. Bolts of loops do not tighten.


1. Cautiously close a cover and check up backlashes between a cover and the next panels. The cover is regulated by moving to apertures of loops at the released bolts. After adjustment bolts tighten.
2. Check up work of the lock of a cover, if necessary adjust moving at the released bolts which after adjustment tighten.

13.14. A cover of a luggage carrier (sedan)

13.16. The lock of a cover of a luggage carrier (sedan)