Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
13.1. Specifications
13.2. Maintenance service
13.3. Small damages of a body
13.4. Large damages of a body
13.5. A forward bumper
13.6. A back bumper
13.7. A cowl
13.8. A cable of a drive of the lock of a cowl
13.9. The cowl lock
13.10. Doors
13.11. The internal panel of a door
13.12. The door lock, the switch of the lock and a handle detail
13.13. Glass of a door and стеклоподъемник
13.14. A cover of a luggage carrier (sedan)
13.15. A cover of a cargo compartment (a compartment and a hatchback)
13.16. The lock of a cover of a luggage carrier (sedan)
13.17. The lock of a cover of a cargo compartment and the handle
13.18. Details of the central lock
13.19. External glasses
13.20. A windscreen, back glass and stationary glasses
13.21. The hatch
13.22. Decorative overlays of a body
13.23. Seats
13.24. Panels of facing of salon
13.25. Average section of the forward panel
13.26. Details of forward facing of salon
14. An electric equipment
 




6ac69956



13-16-zamok-kryshki-bagazhnika-sedan.html

13.16. The lock of a cover of a luggage carrier (sedan)

Removal and installation

PERFORMANCE ORDER
The lock
1. Disconnect latches on a contour of a cover and remove the internal panel.
2. Disconnect latches from a lock cover.
3. Get and take away in a cover a socket of the switch of illumination of a luggage carrier.
4. Turn away two bolts and get the lock from a cover.
5. Take away draught, having turned a key in the lock, and pass a switch socket.
6. Disunite a socket and remove the lock.
7. Will put the lock upside-down.
The switch of the lock of a luggage carrier
1. Remove the decorative panel.
2. Get a lock ring and disconnect from the switch draught of a drive of the lock.
3. Get скобу and remove the switch.
Establish the switch upside-down. Establish the switch upside-down.
Clamp
1. Disconnect a sealant and an overlay.
2. Remove a rug overlay.
3. Designate clamp position, turn away two bolts, get a clamp and disconnect a cable of a drive of the lock from the lever.
4. Establish a clamp upside-down. Before overlay installation check up lock work.


13.15. A cover of a cargo compartment (a compartment and a hatchback)

13.17. The lock of a cover of a cargo compartment and the handle