Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
13.1. Specifications
13.2. Maintenance service
13.3. Small damages of a body
13.3.1. Elimination of small scratches on a body
13.3.2. Repair of dents of a body
13.3.3. Elimination of consequences of corrosion or cracks in body panels
13.3.4. Drawing of a first coat and body painting
13.3.5. Plastic elements
13.4. Large damages of a body
13.5. A forward bumper
13.6. A back bumper
13.7. A cowl
13.8. A cable of a drive of the lock of a cowl
13.9. The cowl lock
13.10. Doors
13.11. The internal panel of a door
13.12. The door lock, the switch of the lock and a handle detail
13.13. Glass of a door and стеклоподъемник
13.14. A cover of a luggage carrier (sedan)
13.15. A cover of a cargo compartment (a compartment and a hatchback)
13.16. The lock of a cover of a luggage carrier (sedan)
13.17. The lock of a cover of a cargo compartment and the handle
13.18. Details of the central lock
13.19. External glasses
13.20. A windscreen, back glass and stationary glasses
13.21. The hatch
13.22. Decorative overlays of a body
13.23. Seats
13.24. Panels of facing of salon
13.25. Average section of the forward panel
13.26. Details of forward facing of salon
14. An electric equipment



13.3. Small damages of a body

If the scratch only is superficial and does not get into body metal, it to eliminate very simply.

1. Wipe area round a scratch means for restoration of a paint or process very small polishing paste to eliminate from a scratch the lagged behind paint and to clear surrounding surface of a wax covering.
2. Wash out this area pure water.
3. Put a new paint on a scratch by means of a thin brush; continue to put thin paint coats while the paint surface on a scratch will not be flush with surrounding paint.
4. Wait within at least two weeks while the paint will harden, then mix it with surrounding paint, having processed scratch area a regenerative solution or very small polishing paste.
5. Then put wax polishing.

If the scratch has got into body metal, having caused a metal rust, it is necessary to use other method.

1. Remove a rust from a bottom of a scratch by means of a knife edge, then put a layer of an anticorrosive paint for prevention of formation of a rust in the future.
2. By means of a rubber or nylon small brush fill a scratch with a first coat.
3. If it is necessary, the first coat can be mixed with a thinner for formation of very liquid paste which perfectly approaches for filling of thin scratches.
4. Before the first coat will harden, wrap up a piece of a soft cotton fabric round a finger.
5. Lower a finger in a thinner, and quickly spend it on a first coat surface on a scratch, it is necessary that the first coat surface was a little bent.
6. The scratch then can be painted over.

13.2.2. An upholstery of salon and rugs

13.3.1. Elimination of small scratches on a body