Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
13.1. Specifications
13.2. Maintenance service
13.3. Small damages of a body
13.4. Large damages of a body
13.5. A forward bumper
13.6. A back bumper
13.7. A cowl
13.8. A cable of a drive of the lock of a cowl
13.9. The cowl lock
13.10. Doors
13.11. The internal panel of a door
13.12. The door lock, the switch of the lock and a handle detail
13.13. Glass of a door and стеклоподъемник
13.14. A cover of a luggage carrier (sedan)
13.15. A cover of a cargo compartment (a compartment and a hatchback)
13.16. The lock of a cover of a luggage carrier (sedan)
13.17. The lock of a cover of a cargo compartment and the handle
13.18. Details of the central lock
13.19. External glasses
13.20. A windscreen, back glass and stationary glasses
13.21. The hatch
13.22. Decorative overlays of a body
13.23. Seats
13.24. Panels of facing of salon
13.25. Average section of the forward panel
13.26. Details of forward facing of salon
14. An electric equipment
 




6ac69956



13-5-perednijj-bamper.html

13.5. A forward bumper

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and establish on supports.
2. Turn out screws (a photo at the left) and remove the bottom mudguards (a photo on the right).
Cars a sedan and a hatchback
3. Turn away screws in wheel niches and disconnect the top part of a bumper from a body.
4. Turn away screws and disconnect the bottom part of a bumper from props.
5. Working under the car, turn away 4 bolts of fastening of arms of a bumper to longerons.
6. On a part of cars disconnect latches with which the plastic section of a bumper fastens to the bottom forward panel of a body.
7. Disconnect the battery from weight, open sockets of antifog headlights (if are provided).
8. Remove a bumper (arrow), having pulled on itself and get arms.
9. If necessary disconnect a plastic overlay of a bumper, having got latches.
Cars with a compartment body
10. Disconnect latches and get panels of protection of wings from both parties.
11. Disconnect latches with which the bottom part of a spoiler fastens to a body and arms.
12. Turn away bolts of fastening of the top part of a spoiler.
13. Disconnect the battery from weight, open sockets of antifog headlights.
14. Cautiously remove a spoiler from a bumper.
15. From outside arches of wheels turn on on 5 nuts of fastening of a bumper to a forward part of wings.
16. Turn on and get bolts from the top part of a bumper.
17. Remove a bumper.
18. If necessary turn away bolts (working from below under a forward part of a wing) and remove a skeleton of a bumper with a buffer overlay.

Installation

The bumper is established upside-down.



13.4. Large damages of a body

13.6. A back bumper