Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
13.1. Specifications
13.2. Maintenance service
13.3. Small damages of a body
13.4. Large damages of a body
13.5. A forward bumper
13.6. A back bumper
13.7. A cowl
13.8. A cable of a drive of the lock of a cowl
13.9. The cowl lock
13.10. Doors
13.11. The internal panel of a door
13.12. The door lock, the switch of the lock and a handle detail
13.13. Glass of a door and стеклоподъемник
13.14. A cover of a luggage carrier (sedan)
13.15. A cover of a cargo compartment (a compartment and a hatchback)
13.16. The lock of a cover of a luggage carrier (sedan)
13.17. The lock of a cover of a cargo compartment and the handle
13.18. Details of the central lock
13.19. External glasses
13.20. A windscreen, back glass and stationary glasses
13.21. The hatch
13.22. Decorative overlays of a body
13.23. Seats
13.24. Panels of facing of salon
13.25. Average section of the forward panel
13.26. Details of forward facing of salon
14. An electric equipment



13.8. A cable of a drive of the lock of a cowl

Removal and installation

1. Open a cowl.
2. Cautiously displace a forward decorative lattice and get a cable from скоб.
3. Turn away three bolts and remove the lock.
4. Pull for a spring and disconnect a cable from the lock lever.
5. On a part of cars turn out скобу cable fastenings.
6. From outside salon turn out the screw of the lateral decorative panel in a niche of feet of the driver. Get a latch and disconnect a sealant from a panel edge, get the panel.
7. Turn away two screws and remove the lever.
8. Get a cable from скоб and extend in a motor compartment. For simplification of assemblage it is recommended to fix a cord on a line of a cable. On a part of cars for access to a cable it is required to remove and take aside some details.
9. The cable is established upside-down. Upon termination of check up lock work.

13.7. A cowl

13.9. The cowl lock