Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
2.1. Specifications
2.2. Service through each 15000 km or 6 months
2.3. Service through each 30000 km or 12 months
2.4. Service through each 60000 km or 2 years
2.5. Service through each 60000 km or 12 months
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



2-1-tekhnicheskie-dannye.html

2.1. Specifications

Recommended lubricants and liquids – see subsection 1.12.7.

Refuelling capacities ()
Oil for the engine
3,2
Cooling system:
  – Cars from a manual transmission
5,5
  – Cars with automatic transmission
5,9

Transmission
Manual transmission, the engine of 1,4 l
2,8
Manual transmission, the engine of 1,6 l
2,9
All а/м with automatic transmission
7,0
Liquid volume in the wheel hydraulic booster
1,0
Fuel tank
50
The oil filter
Liquid freezing point in cooling system:
  – 28 % – antifreeze
-15 WITH
  – 50 % – antifreeze
-30 WITH

Fuel system
Filtering element of the air filter
Carburettor engines
Type Champion W247
Engines with fuel injection:
  – The engine of 1,4 l
Type Champion (not folding)
  – The engine of 1,6 l
Type Champion U548
The fuel filter:
  – Carburettor engines
Type Champion L110
  – Engines with fuel injection
Type Champion L215
Idling turns:
  – Carburettor engines from a manual transmission
750 ( 50) rpm
  – Engines with injection of fuel from a manual transmission
700 ( 50) rpm
  – Carburettor engines from an automatic transmission
850 ( 50) rpm
  – Carburettor engines from an automatic transmission
800 ( 50) rpm
The maintenance WITH:
  – Without neutralizer

1,5 ( 0,5) %

  – With neutralizer

Not above 0,5 % it (is not regulated)

Ignition system
The ignition moment (idling)
Carburettor engines
GA14DS (At the disconnected hoses of a vacuum regulator and рециркуляции)
0 2 to ВМТ
GA14DS (Hoses of a vacuum regulator and рециркуляции are attached)
10 5 to ВМТ
GA16DS (At the disconnected hoses of a vacuum regulator and рециркуляции)
2 2 to ВМТ
GA16DS (Hoses of a vacuum regulator and рециркуляции are attached)
10 5 to ВМТ
Engines with fuel injection
10 2 to ВМТ
Type of spark plugs:
  – Carburettor engines GA16DS
Type Champion RС7YCC4 or RС7YC4
  – Other engines
Type Champion RС9YCC4 or RС9YC4
Backlash between electrodes
1,1 mm

Brakes
Limiting thickness of overlays of disk brakes
2,0 mm
Limiting thickness of overlays of drum-type brakes
1,5 mm
Deflection of belts of a drive of hinged units (mm):
  – The generator and the hydraulic booster pump
7 – 9, limiting – 11
  – The generator without the hydraulic booster pump
7 – 9, limiting – 10
  – The conditioner compressor
6 – 8, limiting – 9,5
  – The hydraulic booster pump

4 – 6, limiting – 7,5


The prevention

The belt deflection is measured at effort 10 кГс (the text see), for a new belt value should be reduced by 1 mm.


The inhaling moments (Н.м.)

The engine pallet
34
Spark plugs
25
Roller nut натяжителя a conditioner belt
28
Drain stopper of the block of cylinders
40
Nuts of wheels
108
Bolts of fastening of seat belts
50
Check point stoppers:
  – A control aperture
29
  – The drain
29
  – A drain stopper of automatic transmission
34


2. Maintenance service

2.2. Service through each 15000 km or 6 months