Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
2.1. Specifications
2.2. Service through each 15000 km or 6 months
2.2.1. Replacement of oil and the oil filter
2.2.2. Check of turns of idling and quality of a mix
2.2.3. Replacement of spark plugs by cars without neutralizer
2.2.4. Check of level of a liquid of a hydrodrive of brakes
2.2.5. Check of level of a liquid in the wheel hydraulic booster
2.2.6. Check of level of a liquid in automatic transmission
2.2.7. Check of leaks and a condition of hoses
2.2.8. Check of level of oil in a manual transmission
2.2.9. Condition check колодок forward and back brakes.
2.2.10. Check and adjustment of a manual brake
2.2.11. Check and adjustment of a drive of coupling
2.3. Service through each 30000 km or 12 months
2.4. Service through each 60000 km or 2 years
2.5. Service through each 60000 km or 12 months
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



2-2-9-proverka-sostoyaniya-kolodok-perednikh-i-zadnikh-tormozov.html

2.2.9. Condition check колодок forward and back brakes.

КОЛОДКИ FORWARD BRAKES

PERFORMANCE ORDER
1. Block back wheels, put the car on a manual brake, then lift the car and establish on supports. Remove forward wheels.
2. Quickly to check up a residual thickness of a material of overlays on колодках it is possible through a window in a support of a forward brake. For more detailed check brake колодки it is possible to remove and clear. After removal колодок it is possible to check up a condition of brake cylinders of a support and a brake disk (subsection 11.7 and subsection 11.5 see).
3. If the residual thickness at least one overlay corresponds to standard value or exceeds this value replace all four brake колодки in the complete set.

КОЛОДКИ BACK BRAKES

PERFORMANCE ORDER
1. Block forward wheels, lift a back part of the car and establish on supports. Remove back wheels.
2. Quickly to check up a residual thickness of a material of overlays on колодках it is possible through a window in a support of a forward brake. For more detailed check brake колодки it is possible to remove and clear. After removal колодок it is possible to check up a condition of brake cylinders of a support and a brake disk (subsection 11.8 and subsection 11.5 see).
3. If the residual thickness at least one overlay corresponds to standard value or exceeds this value replace all four brake колодки in the complete set.


2.2.8. Check of level of oil in a manual transmission

2.2.10. Check and adjustment of a manual brake