Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
2.1. Specifications
2.2. Service through each 15000 km or 6 months
2.3. Service through each 30000 km or 12 months
2.3.1. Check and replacement of belts of a drive of auxiliary units
2.3.2. Replacement of the fuel filter
2.3.3. Replacement of spark plugs (а/м without каталического neutralizer)
2.3.4. Work check заслонки a temperature regulator of the air filter
2.3.5. Check of system of decrease in toxicity of the fulfilled gases
2.3.6. Check of the gauge of exhaust gases
2.3.7. Replacement of a brake liquid
2.3.8. Suspension bracket and steering check
2.3.9. Check of covers of semiaxes
2.3.10. Exhaust system check
2.3.11. Check of corners of installation of wheels
2.3.12. Shift of wheels
2.3.13. Check колодок back drum-type brakes
2.3.14. Check of a condition of seat belts
2.3.15. Greasing of door loops and locks
2.3.16. Car check in road conditions
2.4. Service through each 60000 km or 2 years
2.5. Service through each 60000 km or 12 months
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment



2.3.10. Exhaust system check

1. Check up an exhaust system condition, beginning from the engine to terminal section. Check carry out on the cold engine, after not less than 1 hour after a trip. For check is better to raise the engine to provide an unimpeded access to all details of system.
2. In the absence of the lift lift the car and establish on supports.
3. Check up presence on exhaust pipes and on connections of signs of leak of exhaust gases, strong corrosion and mechanical damages. Be convinced of reliability of fastening and integrity of all arms and support of exhaust pipes. Places of leak of exhaust gases can be found out usually on a soot touch.
4. Strong knocks from outside an exhaust system are usually caused by unreliable fastening of exhaust pipes on arms and support. Shake pipes with mufflers. If pipes and mufflers come to contact with details of a suspension bracket or with the body bottom replace fastening details, or at possibility, separate pipes and turn them from each other to provide sufficient distance from other details.

2.3.9. Check of covers of semiaxes

2.3.11. Check of corners of installation of wheels