Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
2.1. Specifications
2.2. Service through each 15000 km or 6 months
2.3. Service through each 30000 km or 12 months
2.3.1. Check and replacement of belts of a drive of auxiliary units
2.3.2. Replacement of the fuel filter
2.3.3. Replacement of spark plugs (а/м without каталического neutralizer)
2.3.4. Work check заслонки a temperature regulator of the air filter
2.3.5. Check of system of decrease in toxicity of the fulfilled gases
2.3.6. Check of the gauge of exhaust gases
2.3.7. Replacement of a brake liquid
2.3.8. Suspension bracket and steering check
2.3.9. Check of covers of semiaxes
2.3.10. Exhaust system check
2.3.11. Check of corners of installation of wheels
2.3.12. Shift of wheels
2.3.13. Check колодок back drum-type brakes
2.3.14. Check of a condition of seat belts
2.3.15. Greasing of door loops and locks
2.3.16. Car check in road conditions
2.4. Service through each 60000 km or 2 years
2.5. Service through each 60000 km or 12 months
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



2-3-7-zamena-tormoznojj-zhidkosti.html

2.3.7. Replacement of a brake liquid

PERFORMANCE ORDER
1. Procedure is similar to removal of air from a hydrodrive of brakes (subsection 11.2 see). Before liquid replacement it is necessary to suck away the fulfilled liquid from a nutritious tank a rubber pear or a syringe then to fill in a fresh liquid. At removal of air from a contour of a brake highway, it is necessary to extort the fulfilled liquid.
2. Turn away the first union for prorolling of brakes (subsection 11.2 see). Slowly press a brake pedal to remove from a nutritious tank the liquid rests.
3. Add a fresh liquid to a mark the MOVE and continue to press a brake pedal while the fresh liquid will not start to follow from the union. Wrap the union and add in a tank a fresh liquid to a mark the MOVE.
4. Repeat this operation, serially turning on the others of the union of prorolling and pressing a pedal before occurrence of a fresh liquid. Always support liquid level in a nutritious tank above mark МIN, otherwise air because of what duration of prorolling of brakes considerably will increase can get to a highway.
5. Upon termination of tighten the union and dress on them protective caps. Carefully wipe the rests of the spilt liquid and check up level in a nutritious tank of the main cylinder of brakes.
6. Before a trip check up work of brakes.


2.3.6. Check of the gauge of exhaust gases

2.3.8. Suspension bracket and steering check