Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
2.1. Specifications
2.2. Service through each 15000 km or 6 months
2.3. Service through each 30000 km or 12 months
2.4. Service through each 60000 km or 2 years
2.4.1. Replacement of the air filter
2.4.2. Check of system of ignition
2.4.3. Replacement of the filter of ventilation картера
2.4.4. Check of a hose and the control vacuum amplifier
2.4.5. Replacement of a cooling liquid
2.4.6. Replacement трансмиссионной liquids in automatic transmission
2.5. Service through each 60000 km or 12 months
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



2-4-5-zamena-okhlazhdayushhejj-zhidkosti.html

2.4.5. Replacement of a cooling liquid


The prevention

Procedure is carried out on completely cooled down engine, with observance of security measures of work with poisonous liquids.


PERFORMANCE ORDER
1. Cautiously turn away a radiator stopper, having wrapped up a tampon from rags.
2. Translate рычажок managements of a heater in position "hot".
3. Turn away a drain stopper of a radiator (it is specified by an arrow).
4. Merge a liquid in a vessel, having taken measures that the liquid has not got on belts of a drive or on rubber details.
5. If necessary remove a broad tank, merge the rests of a liquid and wash out.
6. Substitute a vessel under a drain stopper of the block of cylinders (it is specified by an arrow).
7. Turn away a stopper on the block of cylinders, then turn on the union for air removal (the union is specified by an arrow). Merge a liquid from the block of cylinders.
8. Wrap a drain stopper, fill in in a radiator pure water. After water will pour down from the engine turn and tighten a drain stopper of the block of cylinders.
9. Continue to fill in water until then while water will not begin to flow from apertures for air removal. Turn заглушки apertures and tighten with the set moment.
10. Add water to a mark the MOVE of a broad tank, densely wrap a stopper of a mouth of a radiator.
11. Start the engine and warm up until then the auxiliary fan of system of cooling will not join yet. Finish 2–3 times turns to 3000 rpm, stop the engine and wait full cooling.
12. Repeat actions in subitem 3-11 until following water does not become pure.
13. Merge water and repeat actions in subitem 8-10, but this time fill in antifreeze in the necessary proportion. Grease a drain stopper of the block of cylinders with fixing structure and tighten with the set moment.
14. Start the engine and warm up to working temperature, stop the engine and wait full cooling.
15. Be convinced of absence of a leak from under understanding connections. Check up liquid level in a broad tank, if necessary add.


2.4.4. Check of a hose and the control vacuum amplifier

2.4.6. Replacement трансмиссионной liquids in automatic transmission