1. Make a short trip to warm up a liquid to working temperature. |
2. Park the car on an equal surface, put on a manual brake and switch off ignition. For expansion of working space lift a forward part of the car and establish on supports. |
3. Get щуп a measuring instrument of level and substitute under transmission a vessel of suitable volume. |
4. Turn away a drain stopper in the pallet of transmission and merge a liquid in a vessel, having taken measures not to burn. Carefully clear a stopper of a drain aperture, having removed metal particles from magnetic inserts. The lining of a stopper after it отворачивания is subject to replacement. |
5. After liquid running off clear carvings on stoppers and in the transmission pallet, tighten a drain stopper with the set moment. Lower the car. |
6. Fill in a liquid through a branch pipe of a measuring instrument of level in the small portions, having inserted a funnel with a thin metal grid. Before level check it is necessary to wait long time that the liquid has completely flown down. Keep in mind that during level check трансмиссионной liquids the car should be on a flat equal surface. |
7. After level of a liquid has reached a point the MOVE on щупе, insert щуп into a branch pipe and start the engine. After some minutes of work idling stop the engine and again check up liquid level. If necessary add. |
8. Make a short trip that the liquid was in regular intervals distributed on internal volume of transmission, then again check up level (subsection 2.2.6 see). |