Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
3.1. The petrol engine in volume of 1,4 and 1,6 litres
3.1.1. Kinds of repair of the engine without dismantle from the car
3.1.1.1. Specifications
3.1.1.2. A compression
3.1.1.3. An order of installation of the piston of 1st cylinder in ВМТ a compression step
3.1.1.4. A cover of a head of the block of cylinders
3.1.1.5. A pulley коленвала
3.1.1.6. A cover of a chain drive of cam-shafts
3.1.1.7. Chains of a drive of cam-shafts
3.1.1.8. Натяжители and успокоители chains, drive asterisks
3.1.1.9. Backlashes in the mechanism of a drive of valves
3.1.1.10. Cam-shafts and pushers
3.1.1.11. A head of the block of cylinders
3.1.1.12. The oil pallet
3.1.1.13. The oil pump
3.1.1.14. Epiploons коленвала
3.1.1.15. A flywheel
3.1.1.16. Engine mount details
3.1.2. Dismantle and engine major repairs
3.2. The petrol engine in volume of 2,0 litres
3.3. The diesel engine
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



3-1-1-14-salniki-kolenvala.html

3.1.1.14. Epiploons коленвала

Replacement

THE RIGHT EPIPLOON (EPIPLOON OF THE FORWARD COVER)

PERFORMANCE ORDER
1. Remove a pulley коленвала.
2. Cautiously take an epiploon, having hooked a screw-driver.
3. Clear the case of an epiploon and remove all agnails and sharp edges.
4. Grease and is cautious запрессуйте a new epiploon against the stop in a fillet provided on an external surface.
5. Remove the greasing rests, then establish a pulley коленвала.

BACK EPIPLOON (FLYWHEEL EPIPLOON)

PERFORMANCE ORDER
1. Remove a flywheel (subsection 3.1.1.15 see).
2. Hook an epiploon and cautiously take from the block of cylinders.
3. Clear the epiploon case.
4. Grease working edges of a new epiploon and a condensed neck коленвала with a thin layer консистентной greasings, it is correct сориентируйте an epiploon rather картера коленвала.
5. Cautiously dress an epiploon on коленвал and запрессуйте without warps so that the epiploon surface was заподлицо with a fillet on the block of cylinders.
6. Remove the greasing rests, establish a flywheel.


3.1.1.13. The oil pump

3.1.1.15. A flywheel