Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
3.1. The petrol engine in volume of 1,4 and 1,6 litres
3.1.1. Kinds of repair of the engine without dismantle from the car
3.1.1.1. Specifications
3.1.1.2. A compression
3.1.1.3. An order of installation of the piston of 1st cylinder in ВМТ a compression step
3.1.1.4. A cover of a head of the block of cylinders
3.1.1.5. A pulley коленвала
3.1.1.6. A cover of a chain drive of cam-shafts
3.1.1.7. Chains of a drive of cam-shafts
3.1.1.8. Натяжители and успокоители chains, drive asterisks
3.1.1.9. Backlashes in the mechanism of a drive of valves
3.1.1.10. Cam-shafts and pushers
3.1.1.11. A head of the block of cylinders
3.1.1.12. The oil pallet
3.1.1.13. The oil pump
3.1.1.14. Epiploons коленвала
3.1.1.15. A flywheel
3.1.1.16. Engine mount details
3.1.2. Dismantle and engine major repairs
3.2. The petrol engine in volume of 2,0 litres
3.3. The diesel engine
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



3-1-1-15-makhovik.html

3.1.1.15. A flywheel

Removal

PERFORMANCE ORDER
1. Remove a check point (subsection 9.1 see) and coupling (subsection 8.5 see).
2. Fix a flywheel from проворачивания.
3. Turn away bolts and cautiously remove a flywheel.
4. If necessary remove about an intensifying plate and pins.

Check

PERFORMANCE ORDER
1. At detection of damages прилегания a disk of coupling it is necessary to replace a flywheel with surfaces.
2. In case of deterioration or loss of teeths it is necessary to replace a wreath. Replacement of a wreath of a flywheel is recommended to be carried out in car-care centre Nissan service.

Installation

PERFORMANCE ORDER
1. Establish directing pins and an intensifying plate.
2. Clear interfaced surfaces of a flywheel and коленвала.
3. Dress a flywheel on коленвал and wrap fastening bolts.
4. Fix a flywheel from проворачивания and tighten bolts with the set moment.
5. Establish coupling and a check point.


3.1.1.14. Epiploons коленвала

3.1.1.16. Engine mount details