Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
3.1. The petrol engine in volume of 1,4 and 1,6 litres
3.1.1. Kinds of repair of the engine without dismantle from the car
3.1.1.1. Specifications
3.1.1.2. A compression
3.1.1.3. An order of installation of the piston of 1st cylinder in ВМТ a compression step
3.1.1.4. A cover of a head of the block of cylinders
3.1.1.5. A pulley коленвала
3.1.1.6. A cover of a chain drive of cam-shafts
3.1.1.7. Chains of a drive of cam-shafts
3.1.1.8. Натяжители and успокоители chains, drive asterisks
3.1.1.9. Backlashes in the mechanism of a drive of valves
3.1.1.10. Cam-shafts and pushers
3.1.1.11. A head of the block of cylinders
3.1.1.12. The oil pallet
3.1.1.13. The oil pump
3.1.1.14. Epiploons коленвала
3.1.1.15. A flywheel
3.1.1.16. Engine mount details
3.1.2. Dismantle and engine major repairs
3.2. The petrol engine in volume of 2,0 litres
3.3. The diesel engine
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



3-1-1-16-detali-podveski-dvigatelya.html

3.1.1.16. Engine mount details


Engine mount details
1. The right support.
2. The right arm.
3. A forward support.
4. A back support.
5. A longeron.
6. A forward support (for a manual transmission).
7. Торсион (for a manual transmission).

Check

PERFORMANCE ORDER
1. Lift the car and establish on supports.
2. Check up presence on support of a suspension bracket of cracks, hardenings, отслоения rubbers from a metal basis. At detection at least one and specified damages of a support replace.
3. A Dinamometrichesky key check up an inhaling of all carving connections of support.
4. Check up deterioration of support for what shake the engine or a support. If in support it is found out big люфт replace the worn out details, preliminary having checked up an inhaling of bolts and nuts.

Replacement

THE RIGHT SUPPORT

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Raise the engine a jack.
3. Turn away three bolts and remove an arm of the right support.
4. Turn away a nut, a coupling bolt and three bolts, remove the right support. Get rubber pillows.
5. If necessary turn away bolts and remove an arm of the right support.
6. Carefully check up presence of signs of deterioration or destructions on all details of the support, the worn out details replace.
7. Establish an arm, tighten bolts.
8. Establish rubber pillows, be convinced that probes of pillows have come into corresponding apertures of an arm. Establish a support, tighten bolts with the set moment.
9. Combine a support with a body arm, insert a coupling bolt and tighten a nut with the set moment. Clean a jack.
10. Establish the top arm of the right support and tighten bolts of fastening of an arm with the set moment.
11. Connect the battery to weight.

THE LEFT SUPPORT

PERFORMANCE ORDER
1. Remove the battery (subsection 7.2 see).
2. Raise the engine a jack.
3. Turn away a nut, a coupling bolt and three bolts of fastening, remove the right support. Get rubber pillows.
4. Carefully check up presence of signs of deterioration or destructions on all details of the support, the worn out details replace.
5. Establish an arm, tighten bolts.
6. Establish rubber pillows, be convinced that probes of pillows have come into corresponding apertures of an arm, establish a support. Tighten bolts of fastening of an arm to a check point with the set moment.
7. Combine the left support with an arm, insert and tighten a coupling bolt.
8. Clean a jack, establish the battery.

FORWARD SUPPORT

PERFORMANCE ORDER
1. Put the car on a manual brake, lift a forward part of the car and establish on supports. Disconnect the battery from weight.
2. On cars from a manual transmission note position of a coupling bolt of a forward support on an arm.
3. Raise the engine a jack.
4. Turn away a nut and get a coupling bolt.
5. Turn away bolts and remove an arm of a forward support.
6. Carefully check up presence of signs of deterioration or destructions on all details of a support, in need of a detail replace. On cars from a manual transmission выпрессуйте a pillow from the central longeron (if necessary) also establish a new pillow, having moistened with a soap solution.
7. Establish on the engine an arm, tighten bolts with the set moment.
8. Insert a coupling bolt of a support, slightly tighten a nut. Сориентируйте the power unit so that the coupling bolt was precisely combined with a label put before removal, tighten a coupling bolt with the set moment.
9. Clean a jack.
10. Lower the car, connect the battery to weight.

BACK SUPPORT

PERFORMANCE ORDER
1. Put the car on a manual brake, lift a forward part of the car and establish on supports. Disconnect the battery from weight.
2. Turn away a nut and get a coupling bolt.
3. Turn away bolts and remove an arm of a back support.
4. Turn away two bolts and remove a support from the central longeron. Remove торсион (on cars from a manual transmission).
5. Carefully check up presence of signs of deterioration or destructions on all details of the support, the damaged details replace.
6. Establish a back support on a longeron and tighten bolts.
7. Establish an arm of a back support and tighten bolts.
8. Combine a back support with an arm, insert a coupling bolt and tighten a nut with the set moment.
9. Lower the car.
10. Connect the battery to weight.


3.1.1.15. A flywheel

3.1.2. Dismantle and engine major repairs