Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
3.1. The petrol engine in volume of 1,4 and 1,6 litres
3.2. The petrol engine in volume of 2,0 litres
3.2.1. Kinds of repair of the engine without dismantle from the car
3.2.1.1. Specifications
3.2.1.2. Compression check in engine cylinders
3.2.1.3. An order of installation of the piston of 1st cylinder in ВМТ a compression step
3.2.1.4. A cover of a head of the block of cylinders
3.2.1.5. A pulley коленвала
3.2.1.6. A cover of a chain drive of cam-shafts
3.2.1.7. A chain of a drive of cam-shafts
3.2.1.8. Натяжитель chains, успокоитель and drive asterisks
3.2.1.9. Cam-shafts
3.2.1.10. Levers of a drive of valves and hydraulic regulators
3.2.1.11. A head of cylinders
3.2.1.12. The oil pallet
3.2.1.13. The oil pump
3.2.1.14. Маслоохладитель
3.2.1.15. Epiploons коленвала
3.2.1.16. A flywheel (or a leading disk of the hydrotransformer)
3.2.1.17. Details of a suspension bracket of the power unit
3.2.2. Dismantle and engine major repairs
3.3. The diesel engine
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



3-2-1-14-maslookhladitel.html

3.2.1.14. Маслоохладитель


Details маслоохладителя

1. The oil filter
2. The case of the oil filter
3. A sealing ring
4. Маслоохладитель
5. A sealing ring
6. An aligning bolt

Removal

PERFORMANCE ORDER
1. Маслооохладитель (if it is provided) it is mounted on the case of the oil filter which will screw in a back part of the block of cylinders.
2. For access to маслоохладителю put the car on a manual brake, lift a forward part of the car and establish on supports. Disconnect the battery from weight.
3. Merge from the engine cooling liquid. It is possible to press also hoses near to unions маслоохладителя, however in the latter case after a detachment of hoses the certain quantity of a liquid will be lost.
4. Disconnect collars and remove hoses with маслоохладителя.
5. Put a paint or a marker a label of mutual orientation маслоохладителя and cases of the oil filter.
6. Substitute under маслоохладитель the pallet of suitable volume and turn away a bolt маслоохладителя. Wait while oil will not cease to flow down in the pallet, then remove маслоохладитель from the engine. Remove ring linings from the case and a fastening bolt маслоохладителя. These linings necessarily replace.
7. Check up a condition маслоохладителя, presence on it of damages, blow the union of a cooling liquid and be convinced of their cleanliness. At detection of damages, or at a contamination of internal channels маслоохладитель it is necessary to replace.

Installation

PERFORMANCE ORDER
1. Establish new sealing rings on the case and on a fastening bolt маслоохладителя.
2. Establish маслоохладитель on the case of the oil filter, combine labels and wrap a bolt. Tighten a bolt with the set moment.
3. Attach hoses, fix their collars.
4. Remove the car from supports. Restore level of a cooling liquid and oil. Start the engine, check up presence of leaks.


3.2.1.13. The oil pump

3.2.1.15. Epiploons коленвала