Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
3.1. The petrol engine in volume of 1,4 and 1,6 litres
3.2. The petrol engine in volume of 2,0 litres
3.2.1. Kinds of repair of the engine without dismantle from the car
3.2.1.1. Specifications
3.2.1.2. Compression check in engine cylinders
3.2.1.3. An order of installation of the piston of 1st cylinder in ВМТ a compression step
3.2.1.4. A cover of a head of the block of cylinders
3.2.1.5. A pulley коленвала
3.2.1.6. A cover of a chain drive of cam-shafts
3.2.1.7. A chain of a drive of cam-shafts
3.2.1.8. Натяжитель chains, успокоитель and drive asterisks
3.2.1.9. Cam-shafts
3.2.1.10. Levers of a drive of valves and hydraulic regulators
3.2.1.11. A head of cylinders
3.2.1.12. The oil pallet
3.2.1.13. The oil pump
3.2.1.14. Маслоохладитель
3.2.1.15. Epiploons коленвала
3.2.1.16. A flywheel (or a leading disk of the hydrotransformer)
3.2.1.17. Details of a suspension bracket of the power unit
3.2.2. Dismantle and engine major repairs
3.3. The diesel engine
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



3-2-1-16-makhovik-ili-vedushhijj-disk-gidrotransformatora.html

3.2.1.16. A flywheel (or a leading disk of the hydrotransformer)

Removal

PERFORMANCE ORDER
Flywheel – cars from a manual transmission
1. Remove a check point, then remove coupling in gathering.
2. Fix a flywheel from проворачивания for a gear wreath by means of the adaptation (it is specified by an arrow). For fixing it is possible to take advantage as well of a corner which rests an end face against a tooth of a wreath of a flywheel and fastens a bolt in an aperture of the block of cylinders.
3. Ослабьте also turn away bolts of fastening of a flywheel. Take measures not to drop a flywheel, so this detail heavy.
4. If necessary remove from the block of cylinders an overlay, preliminary having marked its orientation. At easing of adjusting pins of a plate remove pins and store together with an overlay.
Leading disk of the hydrotransformer – cars with automatic transmission
5. Remove transmission.
6. Fix a leading disk (item 2 see).
7. Turn away bolts of fastening of a leading disk, remove a restrictive plate of a disk.
8. Remove муфту, established between a leading disk and коленвалом.
9. If necessary remove from the block of cylinders an overlay, preliminary having marked overlay orientation. At easing of adjusting pins of a plate remove pins and store together with an overlay.

Condition check

PERFORMANCE ORDER
1. On cars from a manual transmission check up presence on a surface прилегания a conducted disk of coupling to a flywheel of deep furrows, check up presence having chopped off and deterioration on teeths of a wreath of a flywheel. At detection on a working surface of cracks, traces of deep development and other damages it is necessary to replace a flywheel. Nevertheless, the damaged surface it is possible прошлифовать, but for this purpose it is necessary to consult in car-care centre Nissan service, or with the expert.
2. On cars with automatic transmission carefully check up presence of signs of deformation of a leading disk of the hydrotransformer, check up also presence of the thin cracks beginning on apertures under bolts, or the cracks dispersing from the central part to periphery. Check up presence on wreath teeths having chopped off and deterioration signs. At detection of any signs of deterioration or damages a leading disk replace.

Installation

PERFORMANCE ORDER
Flywheel – cars from a manual transmission
1. Establish on the block of cylinders pins (if acted in film) and an overlay.
2. Clear contact surfaces of a flywheel and коленвала.
3. Establish a flywheel and wrap bolts.
4. Fix a flywheel in the way specified above and tighten bolts with the set moment.
5. Establish the coupling mechanism in gathering. Remove the adaptation for fixing of a flywheel and establish a check point.
Leading disk of the hydrotransformer – cars with automatic transmission
6. Establish on the block of cylinders pins (if acted in film) and an overlay.
7. Clear contact surfaces of a leading disk and коленвала.
8. Establish муфту on a back part of a leading disk and dress a disk in gathering with муфтой on коленвал.
9. Establish a restrictive plate and wrap bolts.
Fix a leading disk in the way specified above and tighten bolts with the set moment.
10. Remove the adaptation for fixing of a leading disk and establish transmission.


3.2.1.15. Epiploons коленвала

3.2.1.17. Details of a suspension bracket of the power unit