Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
3.1. The petrol engine in volume of 1,4 and 1,6 litres
3.2. The petrol engine in volume of 2,0 litres
3.2.1. Kinds of repair of the engine without dismantle from the car
3.2.1.1. Specifications
3.2.1.2. Compression check in engine cylinders
3.2.1.3. An order of installation of the piston of 1st cylinder in ВМТ a compression step
3.2.1.4. A cover of a head of the block of cylinders
3.2.1.5. A pulley коленвала
3.2.1.6. A cover of a chain drive of cam-shafts
3.2.1.7. A chain of a drive of cam-shafts
3.2.1.8. Натяжитель chains, успокоитель and drive asterisks
3.2.1.9. Cam-shafts
3.2.1.10. Levers of a drive of valves and hydraulic regulators
3.2.1.11. A head of cylinders
3.2.1.12. The oil pallet
3.2.1.13. The oil pump
3.2.1.14. Маслоохладитель
3.2.1.15. Epiploons коленвала
3.2.1.16. A flywheel (or a leading disk of the hydrotransformer)
3.2.1.17. Details of a suspension bracket of the power unit
3.2.2. Dismantle and engine major repairs
3.3. The diesel engine
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



3-2-1-17-detali-podveski-silovogo-agregata.html

3.2.1.17. Details of a suspension bracket of the power unit

Condition check

PERFORMANCE ORDER
1. If it is necessary to expand working space, lift a forward part of the car and establish on supports.
2. Check up presence on support of a suspension bracket of the power unit of cracks, hardenings, отслоения rubbers from a metal basis. At detection at least one and specified damages of a support replace.
3. Check up an inhaling of all carving connections of support, at possibility the inhaling moment check динамометрическим a key.
4. Check up deterioration of support. For this purpose hook a support the big screw-driver, ломиком or mount and shake, having checked up thereby a free wheeling. If it is impossible to check up in such a way ask the assistant to shake the power unit back and forth and here and there, and observe of support. For new support it is supposed insignificant люфт, at excessive люфте in support signs of their strengthened deterioration are easily found out. If in support it is found out big люфт at first check up an inhaling of bolts and nuts and replace the worn out details, being guided by the description resulted more low.

The right support

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Establish under the engine a support, having laid preliminary between a platform of a support and the engine wooden брусок or a board. Lift a support so that the platform had been apprehended weight of the power unit.
3. Turn away a nut and a coupling bolt, then turn away bolts of fastening and get the right support from a motor compartment. Get rubber pillows which are established on both parties of an arm of a support from outside bodies.
4. If necessary turn away bolts and remove from the engine an arm of the right support of the power unit.
5. Carefully check up presence of signs of deterioration or destructions on all details of a support, in need of a detail replace.
6. At assemblage of the right support attach to the engine an arm, having wrapped bolts (if the arm acted in film), then tighten bolts with the set moment.
7. Establish rubber pillows on a support arm from outside bodies, be convinced that probes of pillows have come into corresponding apertures of an arm. Establish a support on an arm, tighten bolts of fastening with the set moment.
8. Insert a coupling bolt of a support and tighten a nut of a bolt with the set moment. Clean from under the engine a support.
9. Connect the battery to weight.

The left support

PERFORMANCE ORDER
1. Remove the battery and a tray.
2. Establish under the engine a support, having laid preliminary between a platform of a support and the engine wooden брусок or a board. Lift a support so that the platform had been apprehended weight of the power unit.
3. Ослабьте also turn away a coupling bolt of a support, then turn away three bolts of fastening of a support to картеру transmissions and displace a support aside. Get the rubber pillows established on both parties of an arm. If necessary turn away arm bolts from outside a motor compartment.
4. Ослабьте also turn away a coupling bolt of a support, then turn away three bolts of fastening of a support to картеру transmissions and displace a support aside. Get the rubber pillows established on both parties of an arm. If necessary turn away arm bolts from outside a motor compartment.
5. Carefully check up presence of signs of deterioration or destructions on all details of a support, in need of a detail replace.
6. At assemblage of the left support fix an arm, having wrapped bolts (if the arm acted in film) and tighten bolts with the set moment.
7. Establish on an arm rubber pillows, be convinced that probes of pillows have come into corresponding apertures of an arm, submit a support back, having established into place. Wrap bolts of fastening of a support to картеру transmissions, tighten bolts with the set moment.
8. Insert a coupling bolt of a support and tighten a nut of a bolt with the set moment.
9. Clean from under the engine a support. Establish a tray and the battery.

Forward support – for cars a sedan and a hatchback (from a manual transmission)

PERFORMANCE ORDER
1. Put the car on a manual brake, lift a forward part of the car and establish on supports. Disconnect the battery from weight. For expansion of working space turn away screws and remove the bottom guards of mudguards of the engine and transmission.
2. Designate labels position of a coupling bolt of a forward support on an arm that at assemblage to establish a bolt on these labels.
3. Establish under the engine a support, having laid preliminary between a platform of a support and the engine wooden брусок or a board. Lift a support so that the platform had been apprehended weight of the power unit.
4. Turn away a nut and get a coupling bolt of a support.
5. Turn away bolts and remove an arm from a forward part of the engine.
6. Carefully check up presence of signs of deterioration or destructions on all details of a support, in need of a detail replace. If it is necessary to replace a rubber pillow of a support, выпрессуйте a pillow from the central longeron. Establish a new pillow, preliminary having moistened with its soap water (or a washing-up liquid) to facilitate запрессовку.
7. Establish on the engine a support arm, tighten bolts of fastening with the set moment.
8. Insert a coupling bolt of a support, slightly tighten a nut. Сориентируйте the power unit so that the coupling bolt was precisely combined with a label put before removal, tighten a coupling bolt with the set moment.
9. Clean a support from under картера a check point.
10. Establish guards, reliably tighten screws, lower the car and connect the battery to weight.

Forward support – for cars with a body the versatile person from a manual transmission

PERFORMANCE ORDER
1. Execute operations in subitem 1-4.
2. Turn away two bolts and remove from the central longeron of fastening of the engine a support in gathering.
3. If necessary turn away bolts and remove an arm of a support from a forward part of the engine.
4. Carefully check up presence of signs of deterioration or destructions on all details of a support, in need of a detail replace.
5. Establish an arm on the engine (if acted in film), tighten bolts with the set moment.
6. Establish a support on the central longeron and tighten bolts with the set moment.
7. Insert a coupling bolt of a support and slightly tighten a nut.
8. Expose the power unit so that the coupling bolt was precisely combined with a label put before removal, tighten a coupling bolt with the set moment.
9. Clean from under a check point a support.
10. Establish guards, reliably tighten screws, lower the car and attach the battery.

Back support

PERFORMANCE ORDER
1. Put the car on a manual brake, lift a forward part of the car and establish on supports. Disconnect the battery from weight.
2. Turn away a nut and get a coupling bolt of a back support.
3. Turn away bolts of an arm of a back support, and, manipulating, get an arm. Remove the restrictive ring established between an arm and a support.
4. Turn away two bolts and remove a support in gathering from the central longeron.
5. Carefully check up presence of signs of deterioration or destructions on all details of a support, in need of a detail replace.
6. At assemblage establish a back support on a longeron and tighten bolts of fastening with the set moment.
7. Establish into place a restrictive ring, then establish an arm of a back support and tighten bolts of fastening with the set moment.
8. Combine a back support with an arm, insert a coupling bolt and tighten a nut of a bolt with the set moment.
9. Clean supports, connect the battery to weight.


3.2.1.16. A flywheel (or a leading disk of the hydrotransformer)

3.2.2. Dismantle and engine major repairs