Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
3.1. The petrol engine in volume of 1,4 and 1,6 litres
3.2. The petrol engine in volume of 2,0 litres
3.3. The diesel engine
3.3.1. Technical characteristics
3.3.2. A gear belt
3.3.3. Replacement of a lining of a head of cylinders
3.3.4. Valves
3.3.5. Replacement маслоотражательных caps of a core of the valve
3.3.6. Check of directing valves
3.3.7. Grinding in of a saddle of the valve
3.3.8. Processing of a head of cylinders / of valves
3.3.9. Check / adjustment of backlashes of valves
3.3.10. Compression check
3.3.11. A klinovyj belt
3.3.12. Malfunctions of the engine
3.3.13. System of greasing of the engine
3.3.14. Oil a contour
3.3.15. Removal and pallet installation картера
3.3.16. The oil pump
3.3.17. Cooling system
3.3.18. The injection device
3.3.19. Spark plugs
3.3.20. The power supply system
3.3.21. Check / replacement of the valve of a stopping delivery of fuel
3.3.22. Number of turns of idling and the maximum number of turns
3.3.23. Atomizers
3.3.24. The beginning of giving of the fuel pump of a high pressure
3.3.25. Operation during the winter period
3.3.26. Specifications of the power supply system of a diesel engine
3.3.27. A good advice for owners of the diesel car
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



3-3-21-proverka-zamena-klapana-prekrashheniya-podachi-topliva.html

3.3.21. Check / replacement of the valve of a stopping delivery of fuel

The valve of a stopping delivery of fuel on ТНВД opens fuel giving at ignition inclusion. It should be checked up, if the engine is not got or continues to work at ignition deenergizing.

PERFORMANCE ORDER
1. Ask the assistant to include ignition, thus the valve should click.
2. Disconnect штекерное connection of the valve of a stopping delivery of fuel.
3. Connect the voltmeter or a light-emitting diode sampler for pressure check to the tip of a cable plait and weight. Include battery ignition (12В). Otherwise check up conducting under the scheme.
4. Connect an ohmmeter between contact of the valve and weight. Resistance should be 0 Ohm.
5. If necessary turn out the valve and check up ease of a piston stroke and a spring condition.
6. Insert the new valve of a stopping delivery of fuel and tighten with effort 20 Н.м. Attach a cable.
7. Remove from the power supply system air.


3.3.20. The power supply system

3.3.22. Number of turns of idling and the maximum number of turns