Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
3.1. The petrol engine in volume of 1,4 and 1,6 litres
3.2. The petrol engine in volume of 2,0 litres
3.3. The diesel engine
3.3.1. Technical characteristics
3.3.2. A gear belt
3.3.3. Replacement of a lining of a head of cylinders
3.3.4. Valves
3.3.5. Replacement маслоотражательных caps of a core of the valve
3.3.6. Check of directing valves
3.3.7. Grinding in of a saddle of the valve
3.3.8. Processing of a head of cylinders / of valves
3.3.9. Check / adjustment of backlashes of valves
3.3.10. Compression check
3.3.11. A klinovyj belt
3.3.12. Malfunctions of the engine
3.3.13. System of greasing of the engine
3.3.14. Oil a contour
3.3.15. Removal and pallet installation картера
3.3.16. The oil pump
3.3.17. Cooling system
3.3.18. The injection device
3.3.19. Spark plugs
3.3.20. The power supply system
3.3.21. Check / replacement of the valve of a stopping delivery of fuel
3.3.22. Number of turns of idling and the maximum number of turns
3.3.23. Atomizers
3.3.24. The beginning of giving of the fuel pump of a high pressure
3.3.25. Operation during the winter period
3.3.26. Specifications of the power supply system of a diesel engine
3.3.27. A good advice for owners of the diesel car
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



3-3-22-chislo-oborotov-kholostogo-khoda-i-maksimalnogo-chisla-oborotov.html

3.3.22. Number of turns of idling and the maximum number of turns

Check / adjustment of number of turns of idling and the maximum number of turns

As diesel engines have no ignition system, the special tachometre working on photo cells is necessary.

PERFORMANCE ORDER
1. Warm up the engine to operational temperature. Temperature of a cooling liquid of minute +80 With.
2. Electroconsumers (a radio receiver, light) should be switched off.
3. Connect a tachometre.
4. 2–3 times give to the engine the big turns and leave to idle.
5. Cock a manual brake.
6. Check up number of turns of idling.
7. If the number of turns of idling is established incorrectly, ослабьте a counternut and adjust number of turns rotation of the adjusting screw (1). After adjustment the screw законтрите.

The prevention

Do not rotate other screws.


Check / adjustment of the maximum number of turns

PERFORMANCE ORDER
1. Check up adjustment of a drive of gas.
2. Completely squeeze out a pedal of gas and check up the maximum number of turns.
3. If the maximum number of turns is established incorrectly, ослабьте a counternut and adjust number of turns, rotating the adjusting screw. After adjustment the screw законтрите also establish a new seal.

The prevention

Do not rotate other screws.


4. Disconnect a tachometre.

Adjustment демфера

PERFORMANCE ORDER
1. Start and warm up the engine while the arrow of the index of temperature of a cooling liquid will not reach the scale middle.
2. Connect a tachometre.
3. Увеличитьте by means of the lever number of turns and slowly release, while the adjusting screw will not concern демфера. The number of turns should be thus 1300 rpm.
4. If necessary establish demanded number of turns by means of the adjusting screw.


3.3.21. Check / replacement of the valve of a stopping delivery of fuel

3.3.23. Atomizers