Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
6.1. Carburettor engines
6.1.1. Specifications
6.1.2. The air filter
6.1.3. A temperature regulator of a stream of air
6.1.4. The fuel pump
6.1.5. The gauge of level of fuel
6.1.6. A fuel tank
6.1.7. A cable of a drive throttle заслонки
6.1.8. A pedal of management throttle заслонкой
6.1.9. Fuel
6.1.10. The carburettor Removal and carburettor installation Diagnostics, dismantling and carburettor adjustment
6.1.11. Gauges and carburettor valves
6.1.12. A soaking up collector
6.1.13. A final collector
6.1.14. An exhaust system
6.2. Engines with system of injection of fuel
6.3. System of a food / of release of the fulfilled gases
6.4. System of decrease in toxicity of the fulfilled gases
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment


6-1-10-1-snyatie-i-ustanovka-karbyuratora.html Removal and carburettor installation


1. Disconnect the battery from weight and partially merge cooling liquid.
2. Remove the air filter.
3. Disconnect a cable throttle заслонки.
4. Disconnect sockets of conducting of the carburettor.
5. Disconnect and muffle a fuel hose (the arrow specifies a collar).
6. Designate all hoses and disconnect them from the carburettor.
7. Turn away 4 bolts and remove the carburettor, remove a heat insulator or a heater (on cars with neutralizer).
8. Muffle an aperture in a collector.


1. Installation is carried out upside-down.
2. Before installation check up cleanliness of interfaced surfaces of a collector and the carburettor.
3. Adjust a cable throttle заслонки.
4. Add a liquid.
5. Check up and if necessary adjust turns of idling and quality of a mix.

6.1.10. The carburettor Diagnostics, dismantling and carburettor adjustment