Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
6.1. Carburettor engines
6.1.1. Specifications
6.1.2. The air filter
6.1.3. A temperature regulator of a stream of air
6.1.4. The fuel pump
6.1.5. The gauge of level of fuel
6.1.6. A fuel tank
6.1.7. A cable of a drive throttle заслонки
6.1.8. A pedal of management throttle заслонкой
6.1.9. Fuel
6.1.10. The carburettor
6.1.11. Gauges and carburettor valves
6.1.12. A soaking up collector
6.1.13. A final collector
6.1.14. An exhaust system
6.2. Engines with system of injection of fuel
6.3. System of a food / of release of the fulfilled gases
6.4. System of decrease in toxicity of the fulfilled gases
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



6-1-7-tros-privoda-drosselnojj-zaslonki.html

6.1.7. A cable of a drive throttle заслонки

Removal

PERFORMANCE ORDER
1. Unhook a cable from a cam on the carburettor.
2. Turn away a nut of a cover of a cable to an arm and get a cover of a cable from an arm (arrows adjusting nuts of a cable throttle заслонки are shown).
3. Release a cable on all line of packing.
4. In salon remove the bottom panel from outside the driver.
5. Disconnect a cable from a pedal.
6. Turn away a nut of fastening of a cover to a partition of a motor compartment and get a cable, having stretched in a motor compartment.

Installation

PERFORMANCE ORDER
1. Pass a cable through a partition of a motor compartment.
2. Stretch a cable in a motor compartment and lay in a place.
3. Fix nuts a cable cover on a partition of a motor compartment.
4. Attach a cable to a pedal.
5. Establish the bottom panel.
6. Fix a cable cover on all line.
7. Attach a cable to a cam on an axis throttle заслонки.
8. Adjust a cable.

Adjustment

PERFORMANCE ORDER
1. Release adjusting nuts, be convinced that the cam rests against the terminator.
2. Tighten a distant nut as soon as the cam will start moving release a nut on 1,5–2 turns and tighten a counternut.
3. Ask the assistant to press a pedal and check up smoothness of moving of a cam.


6.1.6. A fuel tank

6.1.8. A pedal of management throttle заслонкой