Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
6.1. Carburettor engines
6.2. Engines with system of injection of fuel
6.2.1. Specifications
6.2.2. The air filter
6.2.3. A cable of a drive throttle заслонки
6.2.4. A pedal of management throttle заслонкой
6.2.5. Fuel
6.2.6. System of injection of fuel
6.2.7. Декомпрессия fuel system
6.2.8. The fuel pump
6.2.9. The gauge of level of fuel
6.2.10. A fuel tank
6.2.11. System of injection of fuel
6.2.12. The case throttle заслонки
6.2.13. Units of system of injection of fuel
6.2.14. A soaking up collector
6.2.15. A final collector
6.2.16. An exhaust system
6.3. System of a food / of release of the fulfilled gases
6.4. System of decrease in toxicity of the fulfilled gases
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



6-2-1-tekhnicheskie-dannye.html

6.2.1. Specifications


Conclusions of the gauge throttle заслонки (on a manual transmission)


Conclusions of the gauge throttle заслонки (on an automatic transmission)

Conclusions of the gauge of a detonation


Type
System of electronic injection of fuel with management from onboard computer system "Nissan" (ЕCCS)
Codes of engines with fuel injection
GA14DE (1,4) and GA16DE (1,6)
Idling turns
The fuel pump
Electric, it is located in a petrol tank
Pressure of fuel upon a regulator exit
Nearby 3,0 bar

Data for checks

Resistance of a winding of the fuel pump,
0,7 Ohm
Resistance of the gauge of position throttle заслонки
Between conclusions And and In or 1 and 2:
  – At full closing заслонки
0,5 clod
  – At partial opening заслонки
0,5 – 4 clod
  – At full opening заслонки
Nearby 4 clod
Resistance of an atomizer
10 Ohm
Resistance перепускного the air valve of stabilisation of idling
10 Ohm
Check of a winding of the valve of the proof-reader of idling
At giving of a food 12 In on winding conclusions click is listened
The gauge of pressure of the hydraulic booster:
  – At wheel turn
Gauge contacts are opened
  – The wheel does not turn
Contacts are closed
Resistance of the gauge of a cooling liquid:
  – At 20 With
2,2 – 2,9 Clod
  – At 90 With
0,24 – 0,26 Clod
  – At 110 With
0,14 – 0,15 Clod

Only approximate values of resistance are resulted before recognising the gauge faulty consult in car-care centre service.

Recommended gasoline

Cars with каталитическим neutralizer
Neetilirovannyj gasoline with октановым number 95, refuelling этилированным gasoline is forbidden

The inhaling moments (Н.м.)

Bolts of the case throttle заслонки:
  – 1st stage
10
  – 2nd stage
20
Bolts of the distributor of fuel:
  – 1st stage
10
  – 2nd stage
24
Bolts and nuts of a soaking up collector
20
Bolts and nuts of a final collector
21
Exhaust system fastening
Nuts of fastening of a reception pipe to a collector
32
Bolt of fastening of a reception pipe to an arm
23
Nuts of fastening of a reception pipe to intermediate section (neutralizer)
49
Bolts of fastening of neutralizer to terminal section
49
Bolts of fastening of intermediate section to the terminal
49


6.2. Engines with system of injection of fuel

6.2.2. The air filter