Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
6.1. Carburettor engines
6.2. Engines with system of injection of fuel
6.2.1. Specifications
6.2.2. The air filter
6.2.3. A cable of a drive throttle заслонки
6.2.4. A pedal of management throttle заслонкой
6.2.5. Fuel
6.2.6. System of injection of fuel
6.2.7. Декомпрессия fuel system
6.2.8. The fuel pump
6.2.9. The gauge of level of fuel
6.2.10. A fuel tank
6.2.11. System of injection of fuel
6.2.12. The case throttle заслонки
6.2.13. Units of system of injection of fuel
6.2.14. A soaking up collector
6.2.15. A final collector
6.2.16. An exhaust system
6.3. System of a food / of release of the fulfilled gases
6.4. System of decrease in toxicity of the fulfilled gases
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment



6.2.9. The gauge of level of fuel


1. Disconnect the battery from weight.
2. Remove a pillow of a back seat (subsection 13.23 see).
3. Turn away screws two bolts and get a viewing cover.
4. Disconnect from the gauge a socket of conducting and attach to a body a sticky tape.
5. Depressurize fuel system, designate, disconnect and muffle fuel hoses in the top part of the gauge.
6. Designate gauge position (if there is an arrow it should be turned forward on a car course).
7. Turn on накидную a nut easy blows on a screw-driver rested in шлицы of a nut.
8. On a part of cars for gauge removal it is necessary to turn away bolts.
9. Cautiously lift the gauge, disconnect in a tank the pump from скобы, having pressed on скобу, and get the gauge in gathering with the pump.
10. Remove a lining.
11. Disconnect a hose in the bottom part and separate the pump from the gauge.
12. Wash out the filter and attentively examine. At a contamination or damages the filter replace.


1. Installation is carried out upside-down.
2. Replace a sealing ring, reliably fix the pump, before assemblage combine labels on the gauge and a tank.
3. Be convinced of reliability and correctness of joining of all hoses.

6.2.8. The fuel pump

6.2.10. A fuel tank