Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
6.1. Carburettor engines
6.2. Engines with system of injection of fuel
6.3. System of a food / of release of the fulfilled gases
6.3.1. Models with one-dot electronic injection of fuel
6.3.1.1. Technical characteristics
6.3.1.2. The air filter
6.3.1.3. An accelerator rope
6.3.1.4. An accelerator pedal
6.3.1.5. The gasoline which is not containing тетраэтилсвинца
6.3.1.6. System of injection of fuel
6.3.1.7. Fuel system
6.3.1.8. The fuel pump
6.3.1.9. The gauge of level of fuel
6.3.1.10. A fuel tank
6.3.1.11. The case throttle заслонки
6.3.1.12. System of injection of fuel / of ignition
6.3.1.13. Elements of system of injection of fuel
6.3.1.14. An inlet collector
6.3.2. Models with multidot electronic injection of fuel
6.4. System of decrease in toxicity of the fulfilled gases
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



6-3-1-3-trosik-akseleratora.html

6.3.1.3. An accelerator rope

Removal

PERFORMANCE ORDER
1. Unhook a cable from a cam on the case throttle заслонки.
2. Turn away a nut of a cover of a cable to an arm and get a cover of a cable from an arm (an arrow the adjusting nut of a cable throttle заслонки is shown).
3. Release a cable on all line of packing.
4. In salon remove the bottom panel from outside the driver.
5. Disconnect a cable from a pedal.
6. Turn away a nut of fastening of a cover to a partition of a motor compartment and get a cable, having stretched in a motor compartment.

Installation

PERFORMANCE ORDER
1. Pass a cable through a partition of a motor compartment.
2. Stretch a cable in a motor compartment and lay in a place.
3. Fix nuts a cable cover on a partition of a motor compartment.
4. Attach a cable to a pedal.
5. Establish the bottom panel.
6. Fix a cable cover on all line.
7. Attach a cable to a cam on an axis throttle заслонки.
8. Adjust a cable.

Adjustment

PERFORMANCE ORDER
1. Release adjusting nuts, be convinced that the cam rests against the terminator.
2. Tighten a distant nut as soon as the cam will start moving release a nut on 1,5–2 turns and tighten a counternut.
3. Ask the assistant to press a pedal and check up smoothness of moving of a cam.


6.3.1.2. The air filter

6.3.1.4. An accelerator pedal