Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
6.1. Carburettor engines
6.2. Engines with system of injection of fuel
6.3. System of a food / of release of the fulfilled gases
6.3.1. Models with one-dot electronic injection of fuel
6.3.2. Models with multidot electronic injection of fuel
6.3.2.1. Technical characteristics
6.3.2.2. The air filter
6.3.2.3. An accelerator rope
6.3.2.4. An accelerator pedal
6.3.2.5. System of injection of fuel
6.3.2.6. Fuel system
6.3.2.7. The fuel pump
6.3.2.8. The gauge of level of fuel
6.3.2.9. A fuel tank
6.3.2.10. The case throttle заслонки
6.3.2.11. Elements of system of injection of fuel (engines in volume 1,6)
6.3.2.11.1. A fuel collector and fuel injectors
6.3.2.11.2. A regulator of pressure of fuel
6.3.2.11.3. A potentiometer throttle заслонки
6.3.2.11.4. The additional valve of giving of air
6.3.2.11.5. The gauge of a stream of air
6.3.2.11.6. The electromagnetic valve of fast work of the engine
6.3.2.11.7. The temperature valve of the accelerated warming up of the engine
6.3.2.11.8. The gauge of an angle of rotation of a cranked shaft and the capacity transistor
6.3.2.11.9. The gauge of temperature of a cooling liquid
6.3.2.11.10. The electronic block of management of the engine
6.3.2.11.11. The switch of neutral transfer
6.3.2.11.12. The switch of blocking of a starter / of lanterns of a backing
6.3.2.11.13. The relay of the electronic block of management of the engine and the fuel pump
6.3.2.11.14. The switch in system of strengthening of a steering
6.3.2.11.15. The switch in air central air
6.3.2.11.16. The gauge of speed of movement of the car
6.3.2.12. Elements of system of injection of fuel (engines in volume 2,0)
6.3.2.13. An inlet collector
6.4. System of decrease in toxicity of the fulfilled gases
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



6-3-2-11-7-temperaturnyjj-klapan-uskorennogo-progreva-dvigatelya.html

6.3.2.11.7. The temperature valve of the accelerated warming up of the engine


The temperature valve of the accelerated warming up of the engine is established on a left-hand side of the case throttle заслонки.

Before its removal, disconnect a wire of the negative plug of the accumulator.

Removal and installation

PERFORMANCE ORDER
1. Remove the air filter, being guided by the instructions, resulted subsection 6.3.2.2.
2. Turn off and remove a nut and a washer, then, remove a fixing plate of a cam of fast idling, пружинку, a washer and the lever, having remembered, as they have been established.
3. Turn off the fixing screw and remove a fixing plate of the valve. Get the valve and remove its sealing ring.
4. Installation is spent upside-down removals. At installation use a new sealing ring and check up, that all elements of the connecting mechanism have been correctly established.


6.3.2.11.6. The electromagnetic valve of fast work of the engine

6.3.2.11.8. The gauge of an angle of rotation of a cranked shaft and the capacity transistor