Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
6.1. Carburettor engines
6.2. Engines with system of injection of fuel
6.3. System of a food / of release of the fulfilled gases
6.3.1. Models with one-dot electronic injection of fuel
6.3.2. Models with multidot electronic injection of fuel
6.3.2.1. Technical characteristics
6.3.2.2. The air filter
6.3.2.3. An accelerator rope
6.3.2.4. An accelerator pedal
6.3.2.5. System of injection of fuel
6.3.2.6. Fuel system
6.3.2.7. The fuel pump
6.3.2.8. The gauge of level of fuel
6.3.2.9. A fuel tank
6.3.2.10. The case throttle заслонки
6.3.2.11. Elements of system of injection of fuel (engines in volume 1,6)
6.3.2.12. Elements of system of injection of fuel (engines in volume 2,0)
6.3.2.12.1. A fuel collector and fuel injectors
6.3.2.12.2. A regulator of pressure of fuel
6.3.2.12.3. A potentiometer throttle заслонки
6.3.2.12.4. The gauge of a stream of air
6.3.2.12.5. The additional valve of giving of air
6.3.2.12.6. The electromagnetic valve of fast work of the engine
6.3.2.12.7. The block of adjustment of giving of air (an idling mode)
6.3.2.12.8. The valve of adjustment of receipt of air
6.3.2.12.9. The gauge of an angle of rotation of a cranked shaft
6.3.2.12.10. The capacity transistor
6.3.2.12.11. The gauge of detonation combustion of fuel
6.3.2.12.12. The electronic block of management of engine work
6.3.2.12.13. The switch of neutral transfer
6.3.2.12.14. The switch of blocking of a starter / of lanterns of a backing
6.3.2.12.15. The relay of the electronic block of management engines and the fuel pump
6.3.2.12.16. The switch in system of strengthening of a steering
6.3.2.12.17. The switch in air central air
6.3.2.12.18. The gauge of speed of movement of the car
6.3.2.13. An inlet collector
6.4. System of decrease in toxicity of the fulfilled gases
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



6-3-2-12-6-ehlektromagnitnyjj-klapan-bystrojj-raboty-dvigatelya.html

6.3.2.12.6. The electromagnetic valve of fast work of the engine


The prevention

The electromagnetic valve of fast work of the engine in an idling mode is not on sale separately. If it is faulty, it is necessary to replace all block of adjustment of giving of air at engine work in an idling mode. This block fastens to an inlet collector and includes the additional valve of giving of air, the electromagnetic valve of increase in speed of work of the engine in a mode of idling and the adjusting screw of speed of idling.


The electromagnetic valve of fast work of the engine in an idling mode is established on the right party of an inlet collector.

Before its removal, disconnect a wire of the negative plug of the accumulator.

Removal and installation

PERFORMANCE ORDER
1. Walk along wires from the electromagnetic valve to its socket of connection and disconnect a connection socket.
2. Unscrew the electromagnetic valve from an inlet collector, remove плунжер, пружинку and a sealing washer.
3. Installation is spent upside-down removals. At installation use a new sealing washer. Check up, that плунжер and пружинка have been correctly established.


6.3.2.12.5. The additional valve of giving of air

6.3.2.12.7. The block of adjustment of giving of air (an idling mode)