Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
6.1. Carburettor engines
6.2. Engines with system of injection of fuel
6.3. System of a food / of release of the fulfilled gases
6.3.1. Models with one-dot electronic injection of fuel
6.3.2. Models with multidot electronic injection of fuel
6.3.2.1. Technical characteristics
6.3.2.2. The air filter
6.3.2.3. An accelerator rope
6.3.2.4. An accelerator pedal
6.3.2.5. System of injection of fuel
6.3.2.6. Fuel system
6.3.2.7. The fuel pump
6.3.2.8. The gauge of level of fuel
6.3.2.9. A fuel tank
6.3.2.10. The case throttle заслонки
6.3.2.11. Elements of system of injection of fuel (engines in volume 1,6)
6.3.2.12. Elements of system of injection of fuel (engines in volume 2,0)
6.3.2.13. An inlet collector
6.4. System of decrease in toxicity of the fulfilled gases
7. System of start-up of the engine
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



6-3-2-2-vozdushnyjj-filtr.html

6.3.2.2. The air filter

Removal

PERFORMANCE ORDER
Models with the engine in volume of 1,6 litres
1. Release fixing clips and uncover a casing of the air filter together with consolidation.
2. Remove filtering element, having remembered, as it has been established.
3. Disconnect an inlet pipe at the left a casing of the air filter.
4. Ослабьте a fixing collar (arrow), крепящий a casing of the air filter to the case throttle заслонки.
5. Disconnect all air hoses from a casing of the air filter, having remembered or having marked position of their installation and, then turn off a fixing bolt (it is specified by an arrow).
6. Release a fixing collar and remove a casing from above cases throttle заслонки. Disconnect all vacuum from a casing of the air filter, having remembered or having marked position of their installation.
7. Remove a sealing ring from above cases throttle заслонки and put it together with a casing of the air filter.
8. If it is necessary, turn off two fixing bolts, then, disconnect an inlet air pipe from above the resonator and get it from an impellent compartment. Then, it is possible to remove the resonator.
Models with the engine in volume of 2,0 litres
9. Release a fixing collar and remove an inlet air pipe from the gauge of a stream of air.
10. Disconnect a socket of connection of the gauge of a stream of air, then, release fixing clips and uncover a casing of the air filter.
11. Remove filtering element, having remembered, as it has been established.
12. Disconnect an inlet air pipe from a casing of the air filter, then, turn off fixing bolts of a casing and get a casing from an impellent compartment.
13. After casing removal it is possible to remove various hoses and resonators after their fixing bolts will be turned off and hoses are disconnected.
14. Disconnect hoses (are specified by arrows) and ослабьте fixing collars of an air pipe.
15. Remove an air pipe and disconnect its bottom air hose.

Installation

PERFORMANCE ORDER
Installation is spent upside-down removals. Check up, that all air lines and hoses have been correctly connected and reliably fastened by means of collars.


6.3.2.1. Technical characteristics

6.3.2.3. An accelerator rope