Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
7.1. Specifications
7.2. The battery
7.3. The generator
7.4. System of start-up of the engine
7.5. The gauge of emergency pressure of oil
7.6. A starter
7.7. Ignition system
7.7.1. Specifications
7.7.2. Check of system of ignition
7.7.3. The ignition coil
7.7.4. The ignition distributor
7.7.5. The integrated module
7.7.6. The module of the transistor switchboard
7.7.7. The ignition moment
8. Coupling
9. Transmissions
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



7-7-5-integralnyjj-modul.html

7.7.5. The integrated module

Only for carburettor engines without neutralizer.

Removal

PERFORMANCE ORDER
1. Remove the distributor.
2. Remove бегунок.
Distributor Hitachi
3. Put a label on that part of the gear core which is turned upwards.
4. Remove the core, get a pin. If necessary it is possible to remove бегунок.
5. Cautiously disconnect from the wire module, remembering an order of their arrangement.
6. Turn away screws and remove the module.
Distributor Mitsubishi
7. Uncover the distributor.
8. Disconnect wires, turn away screws and get the probe.
9. Turn away screws and remove the integrated module.

Installation

PERFORMANCE ORDER
1. Installation is carried out upside-down.
2. On distributor Hitachi check up a backlash in the induction gauge between the core and статором which should be 0,3–0,5 mm.
3. If necessary adjust, having turned away screws and having moved статор.


7.7.4. The ignition distributor

7.7.6. The module of the transistor switchboard