Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
9.1. A mechanical transmission
9.1.1. Specifications
9.1.2. The mechanism of change of transfers
9.1.3. Epiploons
9.1.4. The gauge of neutral position
9.1.5. The switch of a signal of a backing
9.1.6. A speedometer reducer
9.2. An automatic transmission
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment



9.1.4. The gauge of neutral position

Gauge arrangement

The gauge (it is established only on cars with neutralizer) will screw in a bottom картера a check point on the right side.

Check, removal and installation
1. Disconnect a socket in the top part картера and check up a chain between gauge conclusions.
2. Gauge contacts should be closed only at neutral position of the lever.
3. Otherwise check up conducting.
4. If conducting is serviceable, the gauge replace.
5. To remove the gauge lift a back part of the car and establish on supports, merge oil from a check point.
6. Disconnect a gauge socket from outside a plait.
7. Turn out the gauge.
8. Clear a carving картера and grease a carving of the new gauge with hermetic.
9. Screw the gauge.
10. Tighten the gauge and attach a socket.
11. Lower the car, fill in oil in a check point.

9.1.3. Epiploons

9.1.5. The switch of a signal of a backing