Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
9.1. A mechanical transmission
9.2. An automatic transmission
9.2.1. Specifications
9.2.2. A cable of management of transmission
9.2.3. The selector
9.2.4. A switching cable for the lowered speed
9.2.5. A speedometer reducer
9.2.6. Epiploons
9.2.7. The double switch of a backing and starter blocking
9.2.8. The overload switch
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



9-2-3-selektor.html

9.2.3. The selector


Selector details

1. An overlay with instructions of position of the selector

2. The button

3. A spring

4. The handle

5. A socket

6. A control lamp

7. Скоба cable covers

8. A cable

9. A cover

10. Скоба

11. The selector mechanism in gathering

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and establish on supports.
2. Translate the selector in River position
3. Remove the central section of the forward panel.
4. Turn away a nut, get скобу covers of a cable and disconnect a cable from the selector.
5. Disconnect sockets from the switch of an overload and from a control lamp.
6. Turn away screws wring out the button and remove the selector handle.
7. If necessary it is possible to remove the button and a switch spring.
8. Turn away a nut (access is provided from below and from within salon) and remove the selector mechanism.
9. The selector mechanism is not folding unit and to repair will not lie down.

Installation

PERFORMANCE ORDER
1. Establish the mechanism of the selector and tighten nuts.
2. Establish a spring and the button in the selector handle.
3. Correct conducting and dress the handle.
4. Tighten screws and check up selector fixing.
5. Attach sockets.
6. Attach a cable and fix a cover on an arm, tighten a nut and insert скобу.
7. Adjust a cable of the selector and establish the central section of the forward panel.


9.2.2. A cable of management of transmission

9.2.4. A switching cable for the lowered speed