Service Nissan Sunny with 1991 on 1997 of release in a body n-14.
1. The maintenance instruction
2. Maintenance service
3. Engines
4. Cooling system
5. Heating and ventilation system
6. Fuel and an exhaust system
7. System of start-up of the engine
8. Coupling
9. Transmissions
9.1. A mechanical transmission
9.2. An automatic transmission
9.2.1. Specifications
9.2.2. A cable of management of transmission
9.2.3. The selector
9.2.4. A switching cable for the lowered speed
9.2.5. A speedometer reducer
9.2.6. Epiploons
9.2.7. The double switch of a backing and starter blocking
9.2.8. The overload switch
10. Semiaxes
11. Brakes
12. Suspension brackets and a steering
13. A body
14. An electric equipment
 




6ac69956



9-2-avtomaticheskaya-korobka-peredach.html

9.2. An automatic transmission

Automatic transmissions are established on cars with engines of 1.4 and 1,6 l. Transmission consists of the hydrotransformer, planetary transfer and multidisk гидромуфт and сервотормозов.

Planetary transfer transfers a twisting moment from the engine at various transfer numbers. The transmissionnaja liquid which is under pressure, includes and disconnects variety гидромуфт and сервотормозов in planetary transfer, than change of transfer number is reached. Pressure of a liquid in system is supported by the separate pump. Management of transmission is provided with the lever of the selector which is fixed in 6 positions. In position D of the selector automatic change of 4 speeds of movement is provided. For automatic switching of transmission for the lowered speed (the raised transfer number) at full opening throttle заслонки the kick-down-device is provided. In position of the selector 2 car can move with the speeds corresponding to the two first transfer numbers, and in position 1 – only to the first transfer number. It is forbidden to switch transmission in positions 1 and 2 if speed exceeds 110 km/hour. On the selector the button of the switch of an other-wordly mode (braking by the engine or an overload) is provided. In normal traffic conditions this switch should be in position ON, and at movement on descents or liftings – in position OFF. Any repair of transmission is carried out in car-care centre service.

Removal

PERFORMANCE ORDER
1. Lift all car and establish on supports.
2. Translate the selector in position N.
3. Remove forward wheels.
4. Merge cooling liquid, tighten a drain stopper.
5. Remove the battery.
6. On cars GE16DE remove a filter air line.
7. Disconnect wires from the double switch and the solenoid.
8. Disconnect a kick-down-cable from throttle заслонки.
9. Turn away a nut and get a cable from an arm and скоб.
10. Disconnect a cable from the transmission lever, get скобу and remove a cable.
11. Press collars hoses of a cooling liquid, turn on the union and disconnect hoses.
12. Disconnect semiaxes (subsection 10.2 see).
13. Remove a reception exhaust pipe.
14. Remove a starter.
15. Remove the bottom cover картера transmissions and turn away hydrotransformer bolts, turning коленвал.
16. Will hang out the engine on тали or raise a jack.
17. Drive an elevating platform and prop up transmission.
18. Turn away a nut and get a coupling bolt of a back support of the engine.
19. Turn away three bolts and remove an arm.
20. Remove a restrictive ring.
21. Turn away a nut and get a coupling bolt of the left support of the engine.
22. Turn away three bolts and remove a support and pillows.
23. Fix the hydrotransformer.
24. Turn away bolts of fastening of transmission, preliminary having designated a place of each bolt (bolts have different length).
25. Be convinced that all necessary details are disconnected and cannot prevent removal.
26. Cautiously submit to the left and roll out a platform with transmission.
27. Get pins, if ослабла their landing.

Installation

PERFORMANCE ORDER
1. Installation is carried out upside-down.
2. At hydrotransformer installation check up distance from apertures of bolts to a demountable plane of transmission () which should be not less than 21,1 mm.
3. Replace epiploons of semiaxes, adjust a kick-down-cable.

Dismantling

Independent repair is not recommended, as high qualification and the special tool is required. With faulty transmission it is necessary to hand over the car in service of car-care centre for diagnostics of codes of refusals and repair. Transmission can be removed only after reading of diagnostic codes.



9.1.6. A speedometer reducer

9.2.1. Specifications